New Products


radial cowl
this cowl is formed with .030 plastic and has a diameter of 2 7/8 inch. the depth os 2 inch from the front to the firewall.

CW-30

$4.50Buy Now

Radial cowl 3 inch diameter
This cowl has a 9 cylinder motor molded into the part . it is formed with .030 plastic and measures 3 inch diameter, 2 inchs to the firewall and 1...

CW-18

$4.50Buy Now

Top Flite Bearcat canopy
This canopy fits the top flite bearcat. it is made with .030 PETG plastic. It measures 10 inch long , 4 1/4 wide and 3 1/4 tall.

C-94

$6.90Buy Now

Direct Connection F-18
this canopy fits the Direct connection F-18. it is made3 with .030 PETG plastic It measures 12 inch long, 3 1/4 wide and 2 1/2 tall.

C-95

$6.90Buy Now

Mohawk Complete Plastic set
 Plastic parts: The plastic parts are, 47 pieces in all. Nose cone;One piece Canopy; nacelles;Cowls;Exhaust ducts;Two pilots;Two ejection...

Mohawk plastic only

$65.00Buy Now

Canadair CL-215 canopy
This canopy fits the ARF Canadaiar CL-215 float plane offered from Nitro planes.. The windows have been formed more shallow than the orignal for a...

C-175

$11.50Buy Now

BF-109
This canopy / cowl set fits Paul Kohlmann's design published in the AMA magazine. The canopy is formed with .030 PETG plastic ( painted so you...

C96

$11.50Buy Now

top flite p-39
This canopy is a copy of topflite's P-39 It is formed with .030 PETG plastic. The same stuff soda botTels are made with so you know it is tuff....

C-400

$11.50Buy Now

Fan trainer
This canopy fits paul's fan trainer . It is made with .030 PETG plastic. the canopy measures 12 inches long, 3 inches wide and 3 1/8 wide.

C-174

$9.20Buy Now

Tip Tank
This tank is used on Pat's  Connie but is the right shape for a large pattyher and other models. If you add fins this shape cou;ld be used...

1025-12

$4.60Buy Now

55 mm EDF nacelle
This naccelle will fit a 55 mm  fan unit. Since the inlet is slightly tapered other sizes will work to. It is formed with .030 Hepa plastric....

55mm EDF nacelle

$8.00Buy Now

Radial cowl
This cowl is formed with .030 plastic that is compatable with most paints. Super glue should be avoided for bonding because it causes cracks. Epoxy,...

CW-19

$4.50Buy Now

Ring Master
This canopy It is formed with .030 PETG plastic and Measures: 11 inches long, 3 1/2 inches wide 3 3/4 inches tall

C209

$5.75Buy Now

F-86
This canopy It is formed with .030 PETG plastic and comes with the cockpit incert. It Measures: 12 inches long, 3 inches wide 2 1//2...

C97

$8.10Buy Now

F35-C
This canopy It is formed with .040 PETG plastic and Measures: 19 inches long, 4 1/2  inches wide 3 3/4 inches tall

C517

$20.70Buy Now

Jet canopy
This canopy It is formed with .030 PETG plastic and Measures: 14 inches long, 4 inches wide 4 inches tall

C516

$17.25Buy Now

Stinger 90 blank
This canopy fits the Hobby King Stinger 90  It is formed with .030 PETG plastic and Measures: 16 1/2 inches long, 4 inches wide 4 inches...

C515

$17.25Buy Now

Sturmovik IL-2
This It is formed with .030 PETG plastic and Measures: 14 inches long, 4 1/4  inches wide 4 inches tall

C501

$18.00Buy Now

Parkzone T-28
This canopy fits the parkzone T-28 ARF. It is formed with .030 PETG plastic and Measures: 11 1/2 inches long, 4 inches wide 3 1//2 inches tall.  

C172

$5.60Buy Now

Eflite Beechcraft Bonanza Cowl
This cowl fits the Eflite Beechcraft Bonanza Cowl P/N  (EFL2580) It is not a fiberglass cowl . it is formed with .040 PETG plastic. The same...

CW-64

$5.75Buy Now

Eflite Beechcraft Bonanza Canopy
This canopy fits the Eflite Beechcraft Bonanza  (EFL2575) it is formed with .040 PETG plastic  to make a tougher canopy. PETG plastic is...

C518

$18.00Buy Now

SGS2-32
This canopy is formed with .030 PETG plastic It measures: 8 1/2 inch long, 3 1/2  inch wide , 2 3/4  inch tall.

C100

$4.60Buy Now

Cirrus
This canopy is formed with .030 PETG plastic It measures: 10 1/2 inch long, 3  inch wide , 3  inch tall.   This canopy...

C99

$4.60Buy Now

Sky Lark 56
This canopy is formed with .030 PETG plastic and comes with the cockpit incert. It measures 12 1/2 inch long, 2 1/4 inch wide , 2 inchg tall.

C98

$5.75Buy Now

Sig Kommander
This canopy is formed with .030 PETG plastic It measures: 11 inch long, 3 1/2 inch wide , 3 1/2 inch tall.    

C173

$9.20Buy Now

Cartoon P-47 Razorback
This kit includes all the formed plastic parts needed to complete the Cartoon P-47 Razorback. The plastic parts makes it easy to build this...

Cartoon P-47 Razorback

$35.00Buy Now

Cartoon Hellcat
This kit includes all the formed plastic parts needed to complete the Cartoon Hell Cat. The plastic parts makes it easy to build this...

Cartoon Hell cat

$35.00Buy Now

Cartoon Corsair
This kit includes all the formed plastic parts needed to complete the Cartoon Cosair. The plastic parts makes it easy to build this little...

Cartoon Cosair

$35.00Buy Now

1958 tripacer cowl
This cowl fits the 1958 Tri Pacer designed by Bill Bradley featured in the July issue of Model Airplane News. Bill wanted you to have a cowl that is...

Bradly 1958 cowl (large)

$13.80Buy Now

70 mm EDF nacelle
~~This is just the nacelle , you will have to provide the support structure for the fan and blast tube. The nose ring fits over the fan case and...

70mm EDF nacelle

$10.00Buy Now
Displaying 151 to 180 (of 594 Products)

Contact Park Flyer Plastics

  • +1(817)233-1215
  • North Richland Hills, TX 76180
  • Email Us

Hours: Monday-Friday 5-8 CST

Copyright © 2023 Park Flyer Plastics - Built by PRO-Webs.net