1 1/2in Dia Plastic Wheels
The wheels come in two halves. Aluminum tubing (not included) is bonded through the center to act as a hub. This allows you to select the hub size to...
1 1/2in X 1 1/2in Pilot P/N 1005-4
This civilian pilot will fit most single seat models with a wing span around 24 inches. Two half construction
1 1/2in X 1 1/2in Pilot P/N 1005-6
Dressed for cold weather this civilian pilot will fit most single seat models with a wing span around 20 inches. Two half construction
1 1/2in X 1 3/8in Pilot P/N 1005-7
Here is a WW1 veteran depending on how you paint him. A single seat model with a wing span around 36 inches should be about right. Two half...
1 1/4in x 1 1/2in Pilot P/N 1005-13
For smaller park jets (around 20 inch span) this guy has a head that can be turned for the photo pass. Three piece construction
1 1/4in X 1 1/2in Pilot P/N 1005-5
Here is a pilot you don t see every day, she would look good in an open cockpit. Two half construction
1 1/4in X 1 1/4in Pilot P/N 1005-9
This small pilot is has a unisex quality. (The long hair is simply paint) a single seat model with a wing span around 20 inches should be about...
1 1/4in X 2in Crew P/N 1005-15
This part number will get you an entire bomber crew, 6 figures in all. They were designed to fit a B-25 with a span of 52 inches but might look right...
1 1/4in X 2in Pilot P/N 1005-20
This guy went A.W.O.L. from the bomber crew to fly his own plane. He should fit well in models with a span of around 40 inches. Two half construction
1 3/4in X 1 1/2in Pilot P/N 1005-8
This husky guy looks like a marine with the flat top hair style. A single seat model with a wing span around 36 inches should be about right. Two...
1 3/4in X 2 1/2in Pilot P/N 1005-11
Depending on the paint applied this guy could pass for either a British or German pilot, a single seat model with a wing span around 24 inches should...
1 3/4in x 2 1/4in Pilot P/N 1005-10
This pilot has been very popular in WW1 biplane park flyers with a span of around 27 inches or WW2 fighters with a span of around 40 inches. Two half...
1 3/4in x 2in Jet Pilot P/N 1005-12
This pilot has been a best seller for us; used in the many pusher jet models with a span of 24 inches. Two half construction The...
1 3/4in x 2in Pilot P/N 1005-1
This navy pilot will fit most fighters with a wing span around 40 inches. Two half construction The assembly instructions are not...
1 3/4in x 2in Pilot P/N 1005-3
This civilian pilot will fit most single seat models with a wing span around 36 inches. Two half construction The assembly instructions...
1/4 Scale Corrugated panels
This material is formed with .020 plastic and can be bonded directly to your models control surface frame.The panels measure 10 1/2...
1/4 Scale Radial 7 cylinder
This model motor measures 11 1/2 inch in diameter and only weighs 15 ounces when completed. This will give your model a better useful load...
quarter radial 7 cyl
1/4 Scale Radial 9 cylinder
This model motor measures 11 1/2 inch in diameter and only weighs 16 ounces when completed. This will give your model a better useful load...
quarter radial 9 cyl
1/5 scale Dauntless Canopy set
This canopy set will allow yoiu to build your Dauntless with canopies that open. I if one blows off or gets dammaged replacement canopies are...
Dauntless canopy set
1/5 scale Long EZ.
This canopy fits a 1/5 scale long EZ as well as the Cressline , St. Croix and the Fusco. The canopy is formed with .030 PETG plastic and measures 19...
10 inch bubble
Made with .030 PETG plastic measures 9 1/2" X 2 1/4" X 2 1/2"
10in x 3 5/8in Teardrop Tank
The 58 gallon teardrop shaped tanks are the easiest of our tanks to assemble and larger sizes will be available later as well as other shapes so...
11 inch bubble
Made with .030 PETG plastic measures 11 1/2" X 2" X 2 1/4"
11in x 1 1/2in Wing Tank
This tank comes formed with .020 plastic an includes doublers to ease assembly.
11in x 1 3/16in Tip Tank
Formed from .020 plastic, This kit will make one tank and can either be used under the wing or as a tip tank. Doublers are provided to ease assembly
11in X 7/16in ROCKET
This kit will make 4 each, mark 5 rockets. Formed in two halves from .020 plastic . The maximum length is listed but can be...
11in X 7/16in ROCKET
This rocket kit will make 5 each, Mark 5 rockets. formed with .030 plastic and comes in two halves. The maximum length is listed but can...
12 inch bubble
This bubble canopy is made with .030 PETG plastic . it measures 12 inch long 2.5 inch wide and 2.5 inch tall
12in x 1/2in Aim -9 Missle
This kit can make either an AIM-9 sidewinder or AIM- 9J. The kits have parts that can make missiles of different types. Assigning a scale to the...
Displaying 1 to 30 (of 595 Products)