New Products


3 3/4in radial front 9cyl P/N 1027-14
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-14

$4.60Buy Now

4in radial front 7cyl P/N 1027-13
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-13

$4.60Buy Now

3 1/4in radial front 9cyl P/N 1027-12
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-12

$3.45Buy Now

3 1/4in radial front 7 cyl P/N 1027-11
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-11

$3.45Buy Now

3in radial front 9cyl P/N 1027-10
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-10

$3.45Buy Now

3in radial front 7cyl P/N 1027-9
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-9

$3.45Buy Now

2 3/4in radial front 9cyl P/N 1027-8
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-8

$2.30Buy Now

2 3/4in radial front 7cyl P/N 1027-7
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-7

$2.30Buy Now

2 1/2in radial front 9cyl P/N 1027-6
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-6

$2.30Buy Now

2 1/2in radial front 7cyl P/N 1027-5
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-5

$2.30Buy Now

2 1/4in radial front 9cyl P/N 1027-4
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-4

$1.20Buy Now

2 1/4in radial front 7cyl P/N 1027-3
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-3

$1.20Buy Now

2in radial front 9 cyl P/N 1027-2
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-2

$1.20Buy Now

2in radial front 7cyl P/N 1027-1
This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020  pet plastic to keep the weight down and...

1027-1

$1.20Buy Now

Tiger Tail
This canopy fits the tiger tail designed by Ron Chidley taken from a De bolt kit. Southern R/C products produced the Tiger Tail.   The canopy is...

C176

$8.00Buy Now

Foam cutting wire 40 Ft
This is 40 foot of foam cutting wire. Its really .020 stainless aircraft saftey wire but works so good at cutting hat I have used it for 20 years....

Foam cut wire

$6.00Buy Now

Grumman Albatross cowl
This cowl fits the Grumman Albatross featured in the AMA Magazine and offered as a short kit on this website.  It measures 4 1/4 Dia and is 2...

CW-35

$6.90Buy Now

Pica Spitfire canopy
This canopy fits the Pica Spitfire. It is formed with a thicker and better 040 PETG plastic. the photo shows silver so you can see the shape but it...

C-399

$19.50Buy Now

B-52 H model nacelle inlet
This inlet  modifies the B-52 -3    Nacelle to the H model version. It fits over the inlet provided with the orignal nacelle. This...

B-52 H inlet cover

$3.45Buy Now

B-52 Short kit
This B-52 has an 82-inch wingspan and is 72 inches long. The empty weight is 7 pounds with a wing area of 787 Sq in.  The construction is...

B-52 short kit

$95.00Buy Now

Reiher canopy
this canopy fits Pilots Reiher glider.  it is formed with .030 PETG plastic and measures  13 inch long, 2 inch wide and 2 inch...

C215

$8.00Buy Now

Cirris
this canopy fits the Grapuner Cirris glider.  the canopy is made with .030 plastic and measures  12 inch long,2 3/4 wide at the base and 2...

C214

$8.00Buy Now

Stuka JU87D-5
this canopy fits the Royal Stuka JU87D-5. it is formed with .030 PETG plastic and measures 13 inch long 4 inch wide at the base and 3 1/4 tall. 

C-311

$9.20Buy Now

Zero
This canopy fits the Scale Craft Zero. it is made with .030 PETG plastic and measures  11 1/4 inch long, 3 1/4 wide at the base, 3 inch...

C213

$8.10Buy Now

Chipmunk canopy
this canopy fits the Ron Daniels design and is made with .030 PETG plastic

C-92

$4.60Buy Now

CMP Zero
This canopy fits the China Mode Products Zero.  (CMP) It is made with a much better plastic (PETG) and has better optics so the work you did to...

C-514

$20.00Buy Now

Bryon F-16
This canopy fits the Bryon F-16 it is formed with .040 PETG plastic, much tougher than the orignal. The canopy measures 17 inch long 4 inches wide...

C 422

$20.70Buy Now

Calfs Spark
This canopy is formed with .030 PETG plastic. It measures 15 inch long, 4 inches wide and 3 3/4 tall. 

C 421

$15.00Buy Now

Grumman Albatross
This model was featured in the AMA magazine 2017 .  It has a wing span of 76 inches and length of 49 inches. The weight is 6 pounds without the...

Grumman Albatross

$95.00Buy Now

Radial cowl with scoops
This cowl is ment to fit the older airliners ( DC-7) It is formed with .030 pastic and measures 2 1/4 Diameter at the firewall and is 3 1/2 inch...

CW-31

$4.50Buy Now
Displaying 121 to 150 (of 596 Products)

Contact Park Flyer Plastics

  • +1(817)233-1215
  • North Richland Hills, TX 76180
  • Email Us

Hours: Monday-Friday 5-8 CST

Copyright © 2023 Park Flyer Plastics - Built by PRO-Webs.net