New Products

this canopy fits the CMP FW-190. it is formed with .040 PETG clear pastic. (silver here so you can see it. ) the canopy measures 12 inches long, 5...

This  plastic set fits the Ricky Rat designed by Dan Kane and is featured on RC groups as an  F-1 racer. This model is approved for the...

this canopy fits the  free Wing F-22. it is made with  .030 clear petg  plastic it  measures 12 inches long , 4 1/2 inches wide,...

There are many uses for  this plastic. I have used it to liine wheel  wells or to detail my cockpits. If you cut them down it is handy as...

This wing tip float fits the Great planes  widgen. It is formed with .020 PETG and is compatable with all paint types and is super glue...

this PT-26 canopy was sent in by Gary Dowler for his model the canopy is made with .030 PETG and measures 12 inches long 3 1/4 wide 2 3/4 tall.

this canopy fits the Miss Ashley design. it measures 16 1/4 inches long  3 1/4 inch s wide and 3 1/2 inches tall.  it  is made with...

this canopy fits the  Eflite Duces Wild model. it is made with tougher material than the orignal .030 PETG. it  measures 18 1/2 inchs...

This canopy fits the Dyna Flight P-40 It is made with .030 PETG plastic and shipps clear. the canopy measures 9 1/2" long,  3 3/4nch wide...

This canopy fits the CY models ME-163 Komet. It will fit a Komet  with a wing span of 60  to 62 wing span. It is made with .030 PETG...

This canopy fits the Top Flight P-47. It is made with .030 PETG plastic and shipps clear. The canopy measures 11 1/2" long,  3 3/4 inch...

This canopy fits the 54 inch span  Jemco Corsair. It is made with .030 PETG plastic and shipps clear. The canopy measures 6" long,  3...

This canopy fits the Boomarang It is made with .030 PETG plastic and shipps clear. The canopy measures 16" long,  5 inch wide , 3 3/4inches...

This canopy fits Bob Holdman's F-18. It is made with .030 PETG plastic and shipps clear. The canopy measures 13" long,  3 3/4 inch wide...

This canopy fits Hobby Kings skipper. It is made with .030 PETG plastic and shipps clear. The canopy measures 7 1/2" long,  4 inch wide , 2...

This canopy fits the Astro Flight ASW-15. It is made with .030 PETG plastic and shipps clear. The canopy measures 8" long,  3 inch wide , 2...

This canopy fits the great Planes Ultra. It is made with .030 PETG plastic and shipps clear. the canopy measures 13" long,  5 1/2 inch wide...

This canopy fits the astro flight ASW-17 model. It is made with .030 PETG plastic and shipps clear.  the canopy measures 10" long, ...

This canopy fits the Cuare 60 It is made with .030 PETG plastic and shipps clear.  the canopy measures 8" long,  3 inch wide , 2 1/4...

This replacement cowl fits the 69-inch span Constellation model offered on this site. It has a 3 ¼ inch diameter and a 2-inch hole opening in...

This Cowl / Canopy combination fits the 42 inch span Aronica Champ designed by Pat Tritle featured in Model Airplane News. The plans are available...

This short Kit comes with inkjet printer plans that are 3 x9 foot!  Plenty of room for the patterns and many illustrations needed to build the...

This nacelle fits the Great Planes Learjet. It is made with .30 HEPA plastic,  not compatable with superglue so model cement s suggested. It...

This canopy fits the BD-5 It is formed with  .020 PETG plastic for toughness and light weight. This piece measures 12  inchs long, 5 inchs...

This canopy fits the NAKKE short version. It is formed with  .020 PETG plastic for toughness and light weight. This piece measures 12 ...

This canopy fits the NAKKE short version. It is formed with  .020 PETG plastic for toughness and light weight. This piece measures 10 1/2 inchs...

This canopy fits the F-5 Parkjet. It is formed with  .020 PETG plastic for toughness and light weight. This piece measures 11 inchs long, 4...

This canopy fits the T-38 Parkjet. It is formed with  .020 PETG plastic for toughness and light weight. This piece measures 13 1/2 inchs long, 4...

This canopy fits the SU-37 Parkjet. The model this canopy fits was designed by Steve Shumate along with many of his parkjet designs. Free plans for...

This canopy fits the F-14 Parkjet. The model this canopy fits was designed by Steve Shumate along with many of his parkjet designs. Free plans for...