All Products

(image for) Classic Pant 2in
Classic Pant 2in
This Classic style pant fits a wheel up to 2 inches  and comes as you see it here. The plastic is .030 thick and assembles with model cement not...

PT - 04

$6.80
Add:
(image for) Classic Pant 3 1/5in
Classic Pant 3 1/5in
This Classic style pant fits a wheel up to 3 1/2 inch  and comes as you see it here. The plastic is .040 thick and assembles with model cement...

PT - 10

$10.00
Add:
(image for) Classic Pant 3in
Classic Pant 3in
This Classic style pant fits a wheel up to 3 inches  and comes as you see it here. The plastic is .030 thick and assembles with model cement not...

PT - 08

$9.20
Add:
(image for) CMP FW-190 canopy
CMP FW-190 canopy
this canopy fits the CMP FW-190. it is formed with .040 PETG clear pastic. (silver here so you can see it. ) the canopy measures 12 inches long, 5...

C-519

$20.00
Add:
(image for) CMP Zero
CMP Zero
This canopy fits the China Mode Products Zero.  (CMP) It is made with a much better plastic (PETG) and has better optics so the work you did to...

C-514

$20.00
Add:
(image for) Cobra 12 1/2"X 2 3/4" X 2 3/4"
Cobra 12 1/2"X 2 3/4" X 2 3/4"
this canopy fits the wings west Cobra and is formed with .030 plastic

C208

$7.50
Add:
(image for) Compensatot
Compensatot
  This canopy fits the contender and is formed with .030 PETG plastic. it measures 12 inches long , 2 1/4 wide and 2 inches tall.

C161

$6.50
Add:
(image for) Constellation
Constellation
This short Kit comes with inkjet printer plans that are 3 x9 foot!  Plenty of room for the patterns and many illustrations needed to build the...

Connie

$85.00
Add:
(image for) Constellation cowl
Constellation cowl
This replacement cowl fits the 69-inch span Constellation model offered on this site. It has a 3 ¼ inch diameter and a 2-inch hole opening in...

Constelation cowl

$6.90
Add:
(image for) Corsair 6 3/4in x 4 3/4in x 3 3/4in
Corsair 6 3/4in x 4 3/4in x 3 3/4in
Formed with .030  plastic. If you are going to order this part I suggest ordering two. This is a plaster tool and I willl not be investing the...

C147

$8.00
Add:
(image for) Cosmos 9in x 3in x 2 3/4in
Cosmos 9in x 3in x 2 3/4in
Formed with .030 plastic

C111

$6.00
Add:
(image for) critical mass canopy
critical mass canopy
This canopy fits Al rabie's critical mass model . The canopy is formed with .030 PETG plastic and measures 10 inches long , 3 inches wide and 2...

C167

$5.60
Add:
(image for) Cub Cowl
Cub Cowl
This cub cowl comes in two halves so assembly is required. Use plastic model cement not CA.   It is formed with .040 plastic to make it tough....

CW-65

$6.90
Add:
(image for) Curae 60 canopy
Curae 60 canopy
This canopy fits the Cuare 60 It is made with .030 PETG plastic and shipps clear.  the canopy measures 8" long,  3 inch wide , 2 1/4...

C-103

$5.50
Add:
(image for) Curare 20
Curare 20
Formed with .030 plastic Measues 6" X 2 1/2" X  2" 

C58

$6.00
Add:
(image for) Cutlass
Cutlass
made with .030 PETG plastic measures 15 1/2"  X 3 3/4"  X 3 1/2"

C404

$11.50
Add:
(image for) Cutlass Supreme 6 1/4in x 2 1/4in X 2in
Cutlass Supreme 6 1/4in x 2 1/4in X 2in
Formed with .030 plastic

C15

$5.75
Add:
(image for) CW 3.5 -A
CW 3.5 -A
This cowl has a diameter of 3 1/2 inch and the length is 2 1/4 inch.  The length can be adjusted with the available cowl extension...

CW 3.5-A

$5.75
Add:
(image for) CW 3.75-A
CW 3.75-A
This cowl has a diameter of 3 3/4 inch and the length is 2 1/2 inch.  The length can be adjusted with the available cowl extension...

CW 3.75-A

$5.75
Add:
(image for) CW 5 1/2-A
CW 5 1/2-A
This cowl has a diameter of 5 1/2 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...

CW 5.5-A

$6.90
Add:
(image for) CW 2.75-A
CW 2.75-A
This cowl has a diameter of 2 3/4 inch and the length is 1 3/4 inch.  The length can be adjusted with the available cowl extension...

CW 2.75-A

$3.15
Add:
(image for) CW 23 PBM long
CW 23 PBM long
  Diameter 4 3/4"    length 4 1/2   " air inlet opening 3"   Suggested dummy motors part...

CW-23 PBM-long

$10.00
Add:
(image for) CW 3-A
CW 3-A
This cowl has a diameter of 3 inchs and the length is 2 inches.  The length can be adjusted with the available cowl extension...

CW 3-A

$4.30
Add:
(image for) CW 3.25 -A
CW 3.25 -A
This cowl has a diameter of 3 1/4 inch and the length is 2 1/8 inch.  The length can be adjusted with the available cowl extension...

CW 3.25-A

$4.30
Add:
(image for) CW 3.87-A
CW 3.87-A
This cowl has a diameter of 3 7/8 inch and the length is 2 5/8 inch.  The length can be adjusted with the available cowl extension if...

CW 3.87-A

$5.75
Add:
(image for) CW 4-A
CW 4-A
This cowl has a diameter of 4 inchs and the length is 2 3/4 inches.  The length can be adjusted with the available cowl extension if needed...

CW 4 -A

$6.33
Add:
(image for) CW 4.25-A
CW 4.25-A
This cowl has a diameter of 4 1/4 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension if...

CW 4.25-A

$6.33
Add:
(image for) CW 4.37-A
CW 4.37-A
This cowl has a diameter of 4 3/8 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...

CW 4.37-A

$6.33
Add:
(image for) CW 4.5-A
CW 4.5-A
This cowl has a diameter of 4 1/2 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension if...

CW 4.5-A

$6.33
Add:
(image for) CW 4.87-A
CW 4.87-A
This cowl has a diameter of 4 7/8 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...

CW 4.87-A

$6.33
Add:
Displaying 241 to 270 (of 598 Products)
Customer Service

Contact Park Flyer Plastics

  • +1(817)233-1215
  • North Richland Hills, TX 76180
  • Email Us

Hours: Monday-Friday 5-8 CST

Copyright © 2024 Park Flyer Plastics ~ Built by PRO-Webs.net