All Products

(image for) 9 1/4 inch 9 cylinder Radial Face P/N 1027-55
9 1/4 inch 9 cylinder Radial Face P/N 1027-55
  This engine face is formed with  clear PETG plastic , the same material used to make soda bottles. However the plastic is thicker . ....

1027-55

$8.00
Add:
(image for) 9 ½in x 1 ¼in Makes 1 GBU-12 Bomb P/N 1037-18
9 ½in x 1 ¼in Makes 1 GBU-12 Bomb P/N 1037-18

1037-18

$5.70
Add:
(image for) 9 ½in x 2 ½in Kit Makes 1 Bomb P/N 1037-7
9 ½in x 2 ½in Kit Makes 1 Bomb P/N 1037-7

1037-7

$8.00
Add:
(image for) 9-1/2in x 1/2in Aim-9 Missile
9-1/2in x 1/2in Aim-9 Missile
This kit can make 2 missiles each of  either an AIM-9 sidewinder, AIM- 9Jor  Aim -9 GM  The kits have parts that can make missiles of...

1038-1

$4.50
Add:
(image for) 90mm fan nacelle
90mm fan nacelle
This nacelle will fit the Wemotec  90mm fan unit.  Instructions for assembly is part of our 757 plastic instructions located under the...

90 mm EDF nacelle

$13.50
Add:
(image for) 9in x 1in Missile
9in x 1in Missile
This kit can make one AIM-54 Phoenix missile or one AGM-55 maverick missile. The kits have parts that can make missiles of different types. Assigning...

1038-12

$4.50
Add:
(image for) A-10 12 1/2" X 3 1/4" x 2 1/2"
A-10 12 1/2" X 3 1/4" x 2 1/2"
Formed with .030 plastic

C309

$7.50
Add:
(image for) A-10 10in long 2 3/4in wide 2in tall
A-10 10in long 2 3/4in wide 2in tall
This canopy fits the  Sparks A-10 offered on this site and is formed with .030 PETG

C113

$4.60
Add:
(image for) A-10 Glow Powered with plans
A-10 Glow Powered with plans
This A-10 design was featured in Model Airplane News July 2001. The article is 18 years old now and there has been over 400 built or at least...

A-10 plans / plastic

$45.00
Add:
(image for) A-4 4 1/4in x 1 1/2in x 1 1/2in
A-4 4 1/4in x 1 1/2in x 1 1/2in
formed  with .020 plastic

C5

$2.00
Add:
(image for) A-7
A-7
made with .020 PETG measures 5 1/2  X 1 3/4  x 1 1/4

C16

$2.00
Add:
(image for) Aeronica Champ 42in
Aeronica Champ 42in
This Cowl / Canopy combination fits the 42 inch span Aronica Champ designed by Pat Tritle featured in Model Airplane News. The plans are available...

Champ 42"

$9.00
Add:
(image for) Air cooling scoops
Air cooling scoops
This set of scoops should keep you from gluing plastic spoons to your models.  There are three types on one sheet and they come in pairs for a...

PP scoop set

$4.30
Add:
(image for) Astro Flight ASW-15
Astro Flight ASW-15
This canopy fits the Astro Flight ASW-15. It is made with .030 PETG plastic and shipps clear. The canopy measures 8" long,  3 inch wide , 2...

C59

$5.00
Add:
(image for) Astro Flight ASW-17
Astro Flight ASW-17
This canopy fits the astro flight ASW-17 model. It is made with .030 PETG plastic and shipps clear.  the canopy measures 10" long, ...

C-191

$6.00
Add:
(image for) Atlas 9 3/4in long 3/14in wide 3 1/4in Tall
Atlas 9 3/4in long 3/14in wide 3 1/4in Tall

C136

$6.50
Add:
(image for) Aurora 11in x 3 1/4in x 3in
Aurora 11in x 3 1/4in x 3in
Formed with .030 plastic

C203

$7.00
Add:
(image for) Aurora 45-90in x 2 1/2in x 2in
Aurora 45-90in x 2 1/2in x 2in
Formed with .030 plastic 

C121

$5.75
Add:
(image for) Avenger aft cockpit 5 1/2in x 4 1/4in x 3 1/4in
Avenger aft cockpit 5 1/2in x 4 1/4in x 3 1/4in
Formed with .030 plastic

C145

$6.10
Add:
(image for) Avenger belly windows 3.5in x 4.5in x 2in
Avenger belly windows 3.5in x 4.5in x 2in
Formed with .030 plastic

C142

$2.88
Add:
(image for) Avenger cockpit 5 1/2in x 4 1/4in x 3 1/4in
Avenger cockpit 5 1/2in x 4 1/4in x 3 1/4in
Formed with .030 plastiic

C144

$6.10
Add:
(image for) Avenger Turret 5in x 3 3/4in
Avenger Turret 5in x 3 3/4in
Formed with .030 plastic

C143

$6.50
Add:
(image for) B-25 W/O Plans
B-25 W/O Plans
This B-25 design was featured in the June 2007 issue of Flying models Magazine. Perfect for the beginner scale foam model builder. The minimum...

B-25-SK

$29.00
Add:
(image for) B-25 WITH Plans
B-25 WITH Plans
Wing span 58 inches Length 44 inches Flying weight 60 Ooz. Featured in the Flying Models Magazine  June 2007 issue. Perfect for the...

B-25-PSK

$48.00
Add:
(image for) B-52 H model nacelle inlet
B-52 H model nacelle inlet
This inlet  modifies the B-52 -3    Nacelle to the H model version. It fits over the inlet provided with the orignal nacelle. This...

B-52 H inlet cover

$3.45
Add:
(image for) B-52 nacelle-1
B-52 nacelle-1
This B-52 nacelle comes in two halves and will fit a scratch built model with a 40 inch wing span.  It is formed with .030 plastic to make the...

B-52 nacelle -1

$1.75
Add:
(image for) B-52 nacelle-2
B-52 nacelle-2
This B-52 nacelle comes in two halves and will fit a scratch built model with a 50 inch wing span.  It is formed with .030 plastic to make the...

B-52 nacelle -2

$2.30
Add:
(image for) B-52 nacelle-3
B-52 nacelle-3
This B-52 nacelle comes in three pircirs and will fit a scratch built model with a 82 inch wing span.  It is formed with .030 plastic to make...

B-52 nacelle -3

$5.75
Add:
(image for) B-52 Short kit
B-52 Short kit
This B-52 has an 82-inch wingspan and is 72 inches long. The empty weight is 7 pounds with a wing area of 787 Sq in.  The construction is...

B-52 short kit

$95.00
Add:
(image for) B-58 EDF with plans
B-58 EDF with plans
The B-58 is a foam sheet and balsa constructed model designed for either ducted fan power or the more affordable pusher prop. The model has no...

B-58 EDF W/Plans

$90.00
Add:
Displaying 151 to 180 (of 599 Products)
Customer Service

Contact Park Flyer Plastics

  • +1(817)233-1215
  • North Richland Hills, TX 76180
  • Email Us

Hours: Monday-Friday 5-8 CST

Copyright © 2024 Park Flyer Plastics ~ Built by PRO-Webs.net