All Products

  This engine face is formed with  clear PETG plastic , the same material used to make soda bottles. However the plastic is thicker . ....

This kit can make 2 missiles each of  either an AIM-9 sidewinder, AIM- 9Jor  Aim -9 GM  The kits have parts that can make missiles of...

This nacelle will fit the Wemotec  90mm fan unit.  Instructions for assembly is part of our 757 plastic instructions located under the...

This kit can make one AIM-54 Phoenix missile or one AGM-55 maverick missile. The kits have parts that can make missiles of different types. Assigning...

Formed with .030 plastic

This canopy fits the  Sparks A-10 offered on this site and is formed with .030 PETG

This A-10 design was featured in Model Airplane News July 2001. The article is 18 years old now and there has been over 400 built or at least...

formed  with .020 plastic

made with .020 PETG measures 5 1/2  X 1 3/4  x 1 1/4

This Cowl / Canopy combination fits the 42 inch span Aronica Champ designed by Pat Tritle featured in Model Airplane News. The plans are available...

This set of scoops should keep you from gluing plastic spoons to your models.  There are three types on one sheet and they come in pairs for a...

This canopy fits the Astro Flight ASW-15. It is made with .030 PETG plastic and shipps clear. The canopy measures 8" long,  3 inch wide , 2...

This canopy fits the astro flight ASW-17 model. It is made with .030 PETG plastic and shipps clear.  the canopy measures 10" long, ...

Formed with .030 plastic

Formed with .030 plastic 

Formed with .030 plastic

Formed with .030 plastic

Formed with .030 plastiic

Formed with .030 plastic

This B-25 design was featured in the June 2007 issue of Flying models Magazine. Perfect for the beginner scale foam model builder. The minimum...

Wing span 58 inches Length 44 inches Flying weight 60 Ooz. Featured in the Flying Models Magazine  June 2007 issue. Perfect for the...

This inlet  modifies the B-52 -3    Nacelle to the H model version. It fits over the inlet provided with the orignal nacelle. This...

This B-52 nacelle comes in two halves and will fit a scratch built model with a 40 inch wing span.  It is formed with .030 plastic to make the...

This B-52 nacelle comes in two halves and will fit a scratch built model with a 50 inch wing span.  It is formed with .030 plastic to make the...

This B-52 nacelle comes in three pircirs and will fit a scratch built model with a 82 inch wing span.  It is formed with .030 plastic to make...

This B-52 has an 82-inch wingspan and is 72 inches long. The empty weight is 7 pounds with a wing area of 787 Sq in.  The construction is...

The B-58 is a foam sheet and balsa constructed model designed for either ducted fan power or the more affordable pusher prop. The model has no...