Short Kits & Plastic Accessories for Flying Models

All Products

Sort by:

12in x 2 1/8in Wing Tank

This tank comes formed with .030 plastic an includes doublers to ease assembly.

1025-9

$4.50

Add:

13 1/2in X 2in wing tank

This tank is used on our OV-10 bronco center line but could be used under the wing of other models. Made with .030 plastic the kit comes with...

1025-2

$6.90

Add:

13-3/8in X 1/2in ROCKET

This kit will make 4 each, Mark 5 rockets. Formed with .030 plastic and comes in two halves. The maximum length is listed but can be...

1036-8

$9.20

Add:

14 1/2in x 2in Wing Tank

This tank comes formed with .030 plastic an includes doublers to ease assembly.

1025-7

$6.90

Add:

14in x 2 11/16in Wing Tank

This tank comes formed with .030 plastic an includes doublers to ease assembly. This tank is used on Al Rabie's Bearcat as well as...

1025-8

$6.90

Add:

14in x 2in wing tank

This tank comes formed with .030 plastic an includes doublers to ease assembly.

1025-3

$4.50

Add:

14in x 9/16in Aim-9 Missile

This kit can make either an AIM-9 sidewinder or AIM- 9J. The kits have parts that can make missiles of different types. Assigning a scale to the...

1038-4

$2.30

Add:

17 1/2in X 2in Wing Tank

This tank is used on our OV-1 Mohawk under the wing but would look right on the centerline of some jets. .030 formed plastic the kit comes with...

1025-4

$6.90

Add:

19 inch bubble

This canopy is made with .030 PETG plastic. it measures 19 inches long , 2 3/4 wide and 2 1/4 tall.

C313

$7.00

Add:

1958 tripacer cowl

This cowl fits the 1958 Tri Pacer designed by Bill Bradley featured in the July issue of Model Airplane News. Bill wanted you to have a cowl that is...

Bradly 1958 cowl (large)

$13.80

Add:

1in x 1 1/4in Pilot P/N 1005-16

One of our smallest pilots designed to fit a park jet with a span of around16 inches. The head can be positioned on this little guy. Three piece...

1005-16

$2.30

Add:

2 1/2in dia WW I Fabric Simulated Hubcaps

This product is for the modelers that make their own wheels. Tnd they are used to add detail to the rim area. The hubcaps come in sets of four and...

1051-2

$1.73

Add:

2 1/2in radial front 7cyl P/N 1027-5

This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020 pet plastic to keep the weight down and...

1027-5

$2.30

Add:

2 1/2in radial front 9cyl P/N 1027-6

This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020 pet plastic to keep the weight down and...

1027-6

$2.30

Add:

2 1/2in X 2 1/2in Pilot P/N 1005-22

This jet pilot was designed to fit the Multiplex Twister but has been applied to many models of equal size. Two half construction. The...

1005-22

$2.88

Add:

2 1/2in x 3 1/4in Pilot P/N 1005-23

This private pilot is assembled in three pieces and is formed with .030 plastic to make the assembly of the head easier.With the head as a separate...

1005-23

$3.45

Add:

2 1/2in X 3in Pilot P/N 1005-18

With the rather bland detailing molded into this figure assembly is simplified. With a little imagination details would be easy to apply with paint....

1005-18

$2.88

Add:

2 1/2in X 3in Pilot P/N 1005-19

This figure is the same as the - 18 but a leather cap has been added to be used in open cockpits. Two half construction The assembly...

1005-19

$2.88

Add:

2 1/4in dia WW I Fabric Simulated Hubcaps

This product is for the modelers that make their own wheels. Tnd they are used to add detail to the rim area. The hubcaps come in sets of four and...

1051-1

$1.15

Add:

2 1/4in radial front 7cyl P/N 1027-3

This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020 pet plastic to keep the weight down and...

1027-3

$1.20

Add:

2 1/4in radial front 9cyl P/N 1027-4

This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020 pet plastic to keep the weight down and...

1027-4

$1.20

Add:

2 3/4in dia WW I Fabric Simulated Hubcaps

This product is for the modelers that make their own wheels. Tnd they are used to add detail to the rim area. The hubcaps come in sets of four and...

1051-3

$2.00

Add:

2 3/4in radial front 7cyl P/N 1027-7

This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020 pet plastic to keep the weight down and...

1027-7

$2.30

Add:

2 3/4in radial front 9cyl P/N 1027-8

This radial Engine front is used to dress up the inside of your Radial cowl. It is formed with .020 pet plastic to keep the weight down and...

1027-8

$2.30

Add:

2 3/4in X 3 1/2in Pilot P/N 1005-21

This stunt pilot was designed to fit the 3D hobbies Extra but should fit most stunt planes with a span of around 36 inches. Two half construction...

1005-21

$2.88

Add:

2 3/4in X 3 3/4in Pilot P/N 1005-24

This private pilot is assembled in three pieces and is formed with .030 plastic to make the assembly of the head easier.With the head as a separate...

1005-24

$3.45

Add:

2 3/4in X 3in Pilot P/N 1005-14

Dressed in a Vietnam flight suit this large pilot was designed to fit our OV-1 Mohawk and OV-1 bronco. Three piece construction The assembly...

1005-14

$3.45

Add:

2 5/8in Dia 7 Cylinder Wasp Radial P/N 1028-1

The radial engine model kits basically come in two halves and are used on models with an open cowl. They would also make a good static display or...

1028-1

$4.50

Add:

2 5/8in Dia 9 Cylinder Wasp Radial P/N 1028-2

The radial engine model kits basically come in two halves and are used on models with an open cowl. They would also make a good static display or...

1028-2

$4.50

Add:

2 ½in Dia Plastic Wheels

The wheels come in two halves. Aluminum tubing (not included) is bonded through the center to act as a hub. This allows you to select the hub size to...

1050-2.5

$2.55

Add:

Displaying 31 to 60 (of 596 Products)