This L-19 was featured in Model Airplane News. This "kit" is intended for the scratch builder that has ordered the plans through the magazine. laser cut part sets are available through Manzano laser works.
http://www.manzanolaser.com/id7.html
With a 6 foot span and only weighing 3 pounds ready to fly it can be flown from very small fields. This short kit comes with the cowl and the formed wing tips. The cowl requires assembly. The model is constructed with 6mm and 3 mm Depron foam sheeting. 1 sheet of 6mm and 3 sheets of 3mm foam are needed to complete the model. ( omit the 6 mm if you buy the laser cut set. The plans have all the patterns needed as well as illustrations to help you through the building processes. An E-flight 280 out runner , 25 amp speed controller and 1200 3 cell lipo pack will give you about 20 min. of flying time.
