This cowl fits the 1958 Tri Pacer designed by Bill Bradley featured in the July issue of Model Airplane News. Bill wanted you to have a cowl that is...
$13.80
This cowl fits the Dynam PBY Catalina. The cowl is made with .040 plastic and measures 2 5/8" DIA. and is 2 inches long.
$2.30
~~This replacement cowl fits the Hobby King Pitts model 12 with the 1600mm wing span. Manufactured by Starmax. and banana hobbies It is formed...
$13.50
This cowl replaces the Hobby King Super Cub. This cowl is now made in two halves and requires assembly. The original single piece cowl and motor...
$11.50
Before you click the buy now button read this!...
$2.30
This Replacement cowl fits Parkzone P-47. The cowl has closer to scale shaped cylinders molded into the inlet recess and the cowl flaps are opened a...
$8.05
This cowl fits the Parkzone HellCat and features a scale 7 cylinder radial rather than the flat stock motor. This scale...
$5.75
This cowl comes not painted and has the improved scale radial motor formed into the cowl. Formed with .040 plastic it is a little tougher that the...
$6.90
This replacement cowl fits the 69-inch span Constellation model offered on this site. It has a 3 ¼ inch diameter and a 2-inch hole opening in...
$6.90
This cowl fits the park Zone Corsair and the Great Planes combat Corsair. It comes un-painted with some assembly and trimming required. The...
$8.05
This cowl comes not painted and has the improved scale radial motor formed into the cowl. Formed with .040 plastic it is a little tougher that the...
$6.90
The rip max Spitfire cowl is .040 thick Vacformed high impact styrene. This is same material as the original but thicker. Due to the size of the cowl...
$9.20
This cowl has a 9 cylinder motor molded into the part . it is formed with .030 plastic and measures 3 inch diameter, 2 inchs to the firewall and 1...
$4.50
This cowl is formed with .030 plastic that is compatable with most paints. Super glue should be avoided for bonding because it causes cracks. Epoxy,...
$4.50
this cowl is formed with .030 plastic and has a diameter of 2 7/8 inch. the depth os 2 inch from the front to the firewall.
$4.50
This cowl and wing tips are sold as a set. The parts fit the mansellet designm seen on RC groups. The cowl is made with .040 thick...
$12.65
This cowl is ment to fit the older airliners ( DC-7) It is formed with .030 pastic and measures 2 1/4 Diameter at the firewall and is 3 1/2 inch...
$4.50
This cowl fits the Grumman Albatross featured in the AMA Magazine and offered as a short kit on this website. It measures 4 1/4 Dia and is 2...
$6.90
This canopy fits Tom Mansell's Thomahawk model. It is formed with .040 white plastic . The cowl Width at the firewall top...
$5.75
This cowl fits the Eflite Beechcraft Bonanza Cowl P/N (EFL2580) It is not a fiberglass cowl . it is formed with .040 PETG plastic. The same...
$5.75
This cub cowl comes in two halves so assembly is required. Use plastic model cement not CA. It is formed with .040 plastic to make it tough....
$6.90
This cowl has a diameter of 5 1/2 inch and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.90
This cowl base fits the 5 1/2 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.90
This cowl has a diameter of 5 1/4 inch and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.90
This cowl base fits the 5 1/4 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.90
This cowl has a diameter of 5 inchs and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.90
This cowl base fits the 5 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.90
This cowl has a diameter of 4 7/8 inch and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.33
This cowl base fits the 4 7/8 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.33
This cowl has a diameter of 4 1/2 inch and the length is 3 inches. The length can be adjusted with the available cowl extension if...
$6.33
This cowl base fits the 4 1/2 inch cowl. This part will extend the length of your cowl by 1 1/2 inch It is also used when cowl flaps are...
$6.33
This cowl has a diameter of 4 3/8 inch and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.33
This cowl base fits the 4 3/8 inch cowl. This part will extend the length of your cowl by 1 1/2 inch It is also used when cowl flaps are...
$6.33
This cowl has a diameter of 4 1/4 inch and the length is 3 inches. The length can be adjusted with the available cowl extension if...
$6.33
This cowl base fits the 4 1/4 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.33
This cowl has a diameter of 4 inchs and the length is 2 3/4 inches. The length can be adjusted with the available cowl extension if needed...
$6.33
This cowl base fits the 4 inch cowl. This part will extend the length of your cowl by 1 5/8 inch It is also used when cowl flaps are...
$6.33
This cowl has a diameter of 3 7/8 inch and the length is 2 5/8 inch. The length can be adjusted with the available cowl extension if...
$5.75
This cowl base fits the 3 7/8 inch cowl. This part will extend the length of your cowl by 1 3/8 inch It is also used when cowl flaps are...
$5.75
This cowl has a diameter of 3 3/4 inch and the length is 2 1/2 inch. The length can be adjusted with the available cowl extension...
$5.75
This cowl base fits the 3 3/4 inch cowl. This part will extend the length of your cowl by 1 3/8 inch It is also used when cowl flaps are...
$5.75
This cowl has a diameter of 3 1/2 inch and the length is 2 1/4 inch. The length can be adjusted with the available cowl extension...
$5.75
This cowl base fits the 3 1/2 inch cowl. This part will extend the length of your cowl by 11 1/4 inch It is also used when cowl flaps are...
$5.75
This cowl has a diameter of 3 1/4 inch and the length is 2 1/8 inch. The length can be adjusted with the available cowl extension...
$4.30
This cowl base fits the 3 1/4 inch cowl. This part will extend the length of your cowl by 1 1/8 inch It is also used when cowl flaps are...
$4.30
This cowl has a diameter of 3 inchs and the length is 2 inches. The length can be adjusted with the available cowl extension...
$4.30
This cowl base fits the 3 inch cowl. This part will extend the length of your cowl by 1 1/8 inch It is also used when cowl flaps are...
$4.30
This cowl has a diameter of 2 3/4 inch and the length is 1 3/4 inch. The length can be adjusted with the available cowl extension...
$3.15
This cowl base fits the 2 3/4 inch cowl. This part will extend the length of your cowl by 1 inch It is also used when cowl flaps are...
$3.15
Diameter 5 1/2 " length 3 1/8 " air inlet opening 3 3/4 " Suggested dummy motors...
$6.00