Formed with .020 plastic
$1.75
Formed with .020 plastic
$1.75
Formed with .020 plastic
$2.30
Formed with .020 plastic
$2.30
This canopy cowl set fits the NEO - 180 Designed by Andy Kuntz Canopy measures 3 1/2 inch long 1 1/3 inch long 1 inch tall
$2.30
This canopy was sent by Bob Aberle for his micro world series of models The canopy is made with .020 PETG
$1.75
This canopy fits Pat Trittles Electra model design. It is made with .020 PETG plastic and comes as a single piece to avoid the required seam in...
$4.00
This canopy fits the NAKKE short version. It is formed with .020 PETG plastic for toughness and light weight. This piece measures 10 1/2 inchs...
$3.45
This canopy fits the NAKKE short version. It is formed with .020 PETG plastic for toughness and light weight. This piece measures 12 ...
$3.45
This canopy fits the Astro Flight ASW-15. It is made with .030 PETG plastic and shipps clear. The canopy measures 8" long, 3 inch wide , 2...
$4.00
This canopy fits Hobby Kings skipper. It is made with .030 PETG plastic and shipps clear. The canopy measures 7 1/2" long, 4 inch wide , 2...
$4.00
made with .030 plastic
$2.30
This canopy fits the old Fomosa ARF fommie It came from our discontinued cockpit upgrade for the model. It is formed with .030 PETG.
$3.45
Formed with .020 plastic
$2.30
This canopy is formed with .030 PETG plastic
$3.45
This canopy fits the MarkMurdock Geobat 36 inch made with .030 clear PETG it measures 8 1/2 inch long X 5 inch wide X 2 1/2 inch tall ...
$6.90
This belly pan fits the mark Murdock 36 inch Geobat. It measures 9 inch tall x 4 inch wide x 1 inch tall Note that the...
$5.75
This Canopy fits the Mark Murdock 28 inch Geobat. made with .020 clear PETG it measures 6 1/2 inch long X 3 3/4 inch wide X 2 inch...
$3.45
Made with .030 PETG plastic measures 9 1/2" X 2 1/4" X 2 1/2"
$5.75
Made with .030 PETG plastic measures 9 1/2" X 2 7/8" X 2 1/4"
$5.75
Made with .030 PETG plastic measures 6" X 3" X 2 1/2"
$5.75
this canopy measures 12 1/2 long, 2 3/4 wide and 2 1/4 tall it is formed with .030 PETG plastic
$5.75
This canopy fits the BD-5 It is formed with .020 PETG plastic for toughness and light weight. This piece measures 12 inchs long, 5 inchs...
$6.90
This clear canopy fits the FMS ASW-17 glider. Not to be confused with the astroflite version . There are no instructions on assembly since the...
$15.00
This is Mark Murdock’s Custom Canopy for made to fit Steve Shumate's 100% Polaris Seaplane Parkflyer. chances are it will...
$5.75
Made with .030 PETG plastic measures 11 1/2" X 2" X 2 1/4"
$5.75
This canopy It is formed with .030 PETG plastic and Measures: 11 inches long, 3 1/2 inches wide 3 3/4 inches tall
$5.75
Made with .030 PETG plastic measures 8 1/2" X 4" X 2 3/4"
$5.75
this canopy fits the Grapuner Cirris glider. the canopy is made with .030 plastic and measures 12 inch long,2 3/4 wide at the base and 2...
$8.00
this canopy fits Pilots Reiher glider. it is formed with .030 PETG plastic and measures 13 inch long, 2 inch wide and 2 inch...
$8.00
This bubble canopy is made with .030 PETG plastic . it measures 12 inch long 2.5 inch wide and 2.5 inch tall
$7.00
This canopy fits a discontinued Bonanza kit from a few years ago. It is formed with .030 PETG.
$5.75
This canopy is made with .030 PETG plastic. it measures 19 inches long , 2 3/4 wide and 2 1/4 tall.
$7.00
This canopy fits the Mark Murdock Geobat 36 to 55 inch span. Made with clear .030 and measures 12" long X 6 "...
$9.20