Balsa Constructed models

The kits we offer here are short kits. All that you will recieve will be the plastic formed parts, plans  and the laser cut wood parts. Some sheeting, sticks or foam blocks will be needed to complete the model. This Keeps the shipping at a reasonable rate and allowes you to choose the material quality and cost. 

(image for) OV-1 MOHAWK WITH Plans

OV-1 MOHAWK WITH Plans

Wing span 59 inches  length 47 inches Featured in Model Airplane News December 2006 issue. This nearly all balsa short kit is suitable for scale...

OV-1-PSK

$200.00
Add:
(image for) Macchi M-5 With Plans

Macchi M-5 With Plans

Wing span 52 inches  Length 35 inches Flying weight 2 pounds.  Balsa construction . Featured in Flying Models magazine in March 2006. This...

PP macchi

$150.00
Add:
(image for) OV-10 BRONCO WITH Plans

OV-10 BRONCO WITH Plans

Span 47 inch length 45 inches flying weight 45 to 60 oz.  Featured in Model Airplane News  January 2006 issue. The Bronco has...

OV-10-PSK

$180.00
Add:
(image for) YO 3A plastic parts

YO 3A plastic parts

Wing span 74 inches Length 41 inches flying weight 24 oz. Featured in Model Airplane News April 2008 issue.  This model to date is the only...

YO 3A

$70.00
Add:
(image for) Macchi plans only

Macchi plans only

Printed on bond paper

Macchi PLN

$20.00
Add:
(image for) Mohawk Complete Plastic set

Mohawk Complete Plastic set

 Plastic parts: The plastic parts are, 47 pieces in all. Nose cone;One piece Canopy; nacelles;Cowls;Exhaust ducts;Two pilots;Two ejection...

Mohawk plastic only

$75.00
Add:
(image for) A-10 Glow Powered with plans

A-10 Glow Powered with plans

This A-10 design was featured in Model Airplane News July 2001. The article is 18 years old now and there has been over 400 built or at least...

A-10 plans / plastic

$45.00
Add:
(image for) OV-10 Bronco Plastic only

OV-10 Bronco Plastic only

This short kit contains all the plastic parts needed to make our OV-10 bronco. 

Bronco plastic only

$55.00
Add:
Displaying 1 to 8 (of 8 Products)