Short Kits & Plastic Accessories for Flying Models

New Products

Sort by:

Skip Mast C-130 nacelle mold

This is a fiberglass mold that is used to make a T-56 nacelle. The nacelle fits the Skip Mast C-130 design. It comes in two halves and is formed...

Skip Mast C-130 glass mold

$10.35

Add:

Servo Arm Fairing

The servo fairings come in pairs and in three sizes, all on one sheet for a total of 6 fairings. large fairing is 3/8 inch wide and 1/4 inch...

servo arm fairing

$4.30

Add:

1/4 Scale Radial 7 cylinder

This model motor measures 11 1/2 inch in diameter and only weighs 15 ounces when completed. This will give your model a better useful load...

quarter radial 7 cyl

$17.90

Add:

1/4 Scale Radial 9 cylinder

This model motor measures 11 1/2 inch in diameter and only weighs 16 ounces when completed. This will give your model a better useful load...

quarter radial 9 cyl

$19.75

Add:

wing tank 22in X 2 5/16in

This is a 600 gallon centerline drop tank but can be configured as a wing tank by changing the fin placement.. Formed from .030 thick plastic...

1025-10

$9.20

Add:

Gear Cover 3 1/2 Wheel dia 7in x 1/2in Strut

If you are tired of your model looking like a mosquito on approach scale gear details do not have to weigh your model down. This gear...

1052-5

$5.75

Add:

Gear Cover 2 1/2 Wheel Dia 6in x 3/8in Strut

If you are tired of your model looking like a mosquito on approach scale gear details do not have to weigh your model down. This gear...

1052-4

$4.60

Add:

Gear Cover 2/14 Wheel Dia 5in x 5/16in Strut

If you are tired of your model looking like a mosquito on approach scale gear details do not have to weigh your model down. This gear...

1052-3

$3.45

Add:

Gear Cover 1 3/4 Wheel Dia 4in x 7/32in Strut

If you are tired of your model looking like a mosquito on approach scale gear details do not have to weigh your model down. This gear...

1052-2

$2.30

Add:

Gear Cover 1 1/2 Wheel Dia 3in x 3/16in Strut

If you are tired of your model looking like a mosquito on approach scale gear details do not have to weigh your model down. This gear wire...

1052-1

$2.30

Add:

12in x 2 1/8in Wing Tank

This tank comes formed with .030 plastic an includes doublers to ease assembly.

1025-9

$4.50

Add:

14in x 2 11/16in Wing Tank

This tank comes formed with .030 plastic an includes doublers to ease assembly. This tank is used on Al Rabie's Bearcat as well as...

1025-8

$6.90

Add:

14 1/2in x 2in Wing Tank

This tank comes formed with .030 plastic an includes doublers to ease assembly.

1025-7

$6.90

Add:

11in x 1 1/2in Wing Tank

This tank comes formed with .020 plastic an includes doublers to ease assembly.

1025-6

$2.30

Add:

9 1/2in x 1 1/2in Wing Tank

This tank comes formed with .020 plastic an includes doublers to ease assembly.

1025-5

$3.50

Add:

Paint tray

This paint tray can be used for mixing colors or keeping your paint from drying out in the bottles. We have also used the tray to mix small amounts...

paint tray

$1.30

Add:

Designers B-24 6 foot span

This B-24 set will fit a model with a 6 foot wing span. Details on this size model is displayed on RC groups. ...

Designers B-24 set

$19.00

Add:

Macchi small 4 1/4in X 3 1/8in P/N 10292-3

This smaller Macchi motor is used on the Mike Midkiff designed free flight model. there is room inside for a small IPS motor and gearbox...

1029-3

$5.75

Add:

17 1/2in X 2in Wing Tank

This tank is used on our OV-1 Mohawk under the wing but would look right on the centerline of some jets. .030 formed plastic the kit comes with...

1025-4

$6.90

Add:

14in x 2in wing tank

This tank comes formed with .030 plastic an includes doublers to ease assembly.

1025-3

$4.50

Add:

13 1/2in X 2in wing tank

This tank is used on our OV-10 bronco center line but could be used under the wing of other models. Made with .030 plastic the kit comes with...

1025-2

$6.90

Add:

11in x 1 3/16in Tip Tank

Formed from .020 plastic, This kit will make one tank and can either be used under the wing or as a tip tank. Doublers are provided to ease assembly

1025-1

$3.50

Add:

8-1/2in x 7/16in Aim-9 Missile

This kit can make 2 missiles each of either an AIM-9 sidewinder, AIM- 9Jor Aim -9 GM This kit can make either an AIM-9 sidewinder or AIM- 9J. The...

1038-2

$4.50

Add:

8-3/4in x 1-1/4in Missile

This kit will make one AGM- 62 Walleye missile. The kit requires assembly and painting. Plastic model cement, acrylic or enamel paints are...

1038- 13

$4.50

Add:

8in x 1in Missile

This kit will make one AGM-12 bull pup missile.. All the kits require assembly and painting. Plastic model cement, acrylic or enamel...

1038-11

$4.00

Add:

9in x 1in Missile

This kit can make one AIM-54 Phoenix missile or one AGM-55 maverick missile. The kits have parts that can make missiles of different types. Assigning...

1038-12

$4.50

Add: