All Products

(image for) HOB T-6 Texan
HOB T-6 Texan
This canopy fits the house of Balsa T-6 Texan . The canopy  is made with .030 PETG plastic. It measures 9 1/2 inch long, 3 1/2 inch wide at the...

C-90

$5.50
Add:
(image for) Hobby King Pitts cowl
Hobby King Pitts cowl
~~This replacement cowl fits the Hobby King Pitts model 12 with the 1600mm wing span. Manufactured by Starmax. and banana hobbies   It is formed...

CW-100

$13.50
Add:
(image for) Hobby King Skipper XL canopy
Hobby King Skipper XL canopy
This canopy fits Hobby Kings skipper. It is made with .030 PETG plastic and shipps clear. The canopy measures 7 1/2" long,  4 inch wide , 2...

C60

$5.00
Add:
(image for) Hobby Kings Super Cub replacement cowl
Hobby Kings Super Cub replacement cowl
This cowl replaces the Hobby King Super Cub. This cowl is now made in two halves and requires assembly. The original single piece cowl and motor...

HK- super Cub cowl

$11.50
Add:
(image for) Hobby Lobby F-16 canopy
Hobby Lobby F-16 canopy
This canopy fits the Hobby Lobby F-16. It is made with .020 PETG plastic . The same material soda bottles are made with and is compatable with ...

C36

$3.00
Add:
(image for) Hobby Lobby F-86 canopy
Hobby Lobby F-86 canopy
This canopy fits the Hobby Lobby F-86. It is made with .020 PETG plastic . The same material soda bottles are made with and is compatable with ...

c35

$3.00
Add:
(image for) Hobby Lobby Mig canopy
Hobby Lobby Mig canopy
This canopy fits the Hobby Lobby Mig. It is made with .020 PETG plastic . The same material soda bottles are made with and is compatable with ...

c34

$3.00
Add:
(image for) Hobby Loby F-4
Hobby Loby F-4
This canopy fits the Hobby Lobby F-4 phantom. It is formed with .030 PETG plastic , compatible with all paints and works with CA cement. its...

76

$6.00
Add:
(image for) Hornet canopy
Hornet canopy
 This Hornet canopy is formed with .020 PETG plastic  and measures 6 1/2 inch long 1 5/8 inch wide and 1 3/8 high.

c28

$3.00
Add:
(image for) Horzion Conscendo Advanced
Horzion Conscendo Advanced
This upgrade is used to cover the fuselage with .020 PETG plastic. The intention is to protect the belly from landing dammage and make the tail ...

Conscendo Upgrade

$12.00
Add:
(image for) House of Balsa Bonanza canopy
House of Balsa Bonanza canopy
This canopy fits the house of balsa Beech Bonanza . It measures 16 1/2 inch long 3 inch wide at the front 2 1/2 inch tall from the base.

C-91

$9.20
Add:
(image for) House of balsa Chipmunk
House of balsa Chipmunk
This canopy fits the House of Balsa Chipmonk. It is formed with  .020 PETG plastic for toughness and light weight. This piece measures 18 1/2...

C181

$7.50
Add:
(image for) House of Balsa P-47
House of Balsa P-47
This canopy fits the House of Balsa P-47 . It is formed with  .020 PETG plastic for toughness and light weight. This piece measures 17 inch...

C-179

$7.50
Add:
(image for) House of Balsa P-51
House of Balsa P-51
This canopy fits the House of Balsa P-51 It is formed with  .020 PETG plastic for toughness and light weight. This piece measures 18 1/2 inch...

C-180

$7.50
Add:
(image for) Hurricane 8in x 3 1/2in x 2 1/2in
Hurricane 8in x 3 1/2in x 2 1/2in
Formed with .030 plastic

C140

$6.10
Add:
(image for) Inline 6 cylinder P/N 1029-4
Inline 6 cylinder P/N 1029-4
4 1/2 Inches long  1  3/8 inch tall and  3/4 inch  This engine detail set might be just what you need for your project. The set...

Haberstat. 1029-4

$4.50
Add:
(image for) Intruder 11in x 5in x 7 3/4in
Intruder 11in x 5in x 7 3/4in
Formed with .030 plastic

C130

$6.00
Add:
(image for) J3 Cub 1/8 scale / SA 1-30
J3 Cub 1/8 scale / SA 1-30
This Cowl fits a Tom Martin's  kit. All his cowls are listed by Tom's part numbers or the kit they apply to.

cub cowl 1/8 SA-130

$6.00
Add:
(image for) JEMCO AT-6 12 1/2" X 3" x 3 3/4"
JEMCO AT-6 12 1/2" X 3" x 3 3/4"
This replacement  canopy fits the JEMCO AT-6 It is formed with .030  PETG.

C401

$6.00
Add:
(image for) Jemco Corsair canopy
Jemco Corsair canopy
This canopy fits the 54 inch span  Jemco Corsair. It is made with .030 PETG plastic and shipps clear. The canopy measures 6" long,  3...

C186

$7.00
Add:
(image for) Jemco FW190 canopy
Jemco FW190 canopy
this canopy fits the Jemco FW190 It is formed with .030 PETG plastic , compatible with all paints and works with CA cement. the canopy measures 17...

C-193

$7.00
Add:
(image for) Jenny motor inline 4 cyl P/N 10292-5
Jenny motor inline 4 cyl P/N 10292-5
  3 Inches long 1 3/4 inch tall and 1 inch wide ( measured at the cylinder head)  This engine detail set is used on Pat...

Jenny 1029-5

$4.50
Add:
(image for) Jenny motor V-8 P/N 10292-6
Jenny motor V-8 P/N 10292-6
  2 1/4 Inches long   3/4 inch tall and 1 inch wide ( measured at the cylinder head)  This engine detail set is used on...

Jenny 1029-6

$4.50
Add:
(image for) Jet canopy
Jet canopy
This canopy It is formed with .030 PETG plastic and Measures: 14 inches long, 4 inches wide 4 inches tall

C516

$17.25
Add:
(image for) Jet canopy 13in x 2 3/4in x 2 1/2in
Jet canopy 13in x 2 3/4in x 2 1/2in
Formed with .030 plastic.

C308

$6.90
Add:
(image for) JR Falcon 6in X 1 1/4in X 3/4in
JR Falcon 6in X 1 1/4in X 3/4in
Formed with .020 PETG plastic

C13

$3.00
Add:
(image for) JR Skylark 7in x 1 1/2in x 1 1/2in
JR Skylark 7in x 1 1/2in x 1 1/2in
Formed with .020 plastic

C4

$3.00
Add:
(image for) KCF-18
KCF-18
This canopy fits the model designed by Dan Eaton. It measures 10 1/2" long 2 3/4" wide and is 2 1/4"  tall. It is made with .030...

C119

$4.00
Add:
(image for) Kohlmann P-36
Kohlmann P-36
The plastic set fits Paul Kohlmann's P-36 design featured in The Model avation magazine.  This plastic set  comes with the canopy ,...

PK P-36

$9.00
Add:
(image for) Kouger canopy
Kouger canopy
This canop[y fits the famous Sig Kouger. made with .30 PETG plastic.

C-106

$6.00
Add:
Displaying 391 to 420 (of 597 Products)
Customer Service

Contact Park Flyer Plastics

  • +1(817)233-1215
  • North Richland Hills, TX 76180
  • Email Us

Hours: Monday-Friday 5-8 CST

Copyright © 2024 Park Flyer Plastics ~ Built by PRO-Webs.net