Short Kits & Plastic Accessories for Flying Models

All Products

Sort by:

1 1/2in Dia Plastic Wheels

The wheels come in two halves. Aluminum tubing (not included) is bonded through the center to act as a hub. This allows you to select the hub size to...

1050-1.5

$1.15

Add:

1 1/2in X 1 1/2in Pilot P/N 1005-4

This civilian pilot will fit most single seat models with a wing span around 24 inches. Two half construction

1005-4

$2.30

Add:

1 1/2in X 1 1/2in Pilot P/N 1005-6

Dressed for cold weather this civilian pilot will fit most single seat models with a wing span around 20 inches. Two half construction

1005-6

$2.30

Add:

1 1/2in X 1 3/8in Pilot P/N 1005-7

Here is a WW1 veteran depending on how you paint him. A single seat model with a wing span around 36 inches should be about right. Two half...

1005-7

$2.88

Add:

1 1/4in x 1 1/2in Pilot P/N 1005-13

For smaller park jets (around 20 inch span) this guy has a head that can be turned for the photo pass. Three piece construction

1005-13

$2.00

Add:

1 1/4in X 1 1/2in Pilot P/N 1005-5

Here is a pilot you don t see every day, she would look good in an open cockpit. Two half construction

1005-5

$2.30

Add:

1 1/4in X 1 1/4in Pilot P/N 1005-9

This small pilot is has a unisex quality. (The long hair is simply paint) a single seat model with a wing span around 20 inches should be about...

1005-9

$2.30

Add:

1 1/4in X 2in Crew P/N 1005-15

This part number will get you an entire bomber crew, 6 figures in all. They were designed to fit a B-25 with a span of 52 inches but might look right...

1005-15 CREW

$7.80

Add:

1 1/4in X 2in Pilot P/N 1005-20

This guy went A.W.O.L. from the bomber crew to fly his own plane. He should fit well in models with a span of around 40 inches. Two half construction

1005-20

$2.30

Add:

1 3/4in X 1 1/2in Pilot P/N 1005-8

This husky guy looks like a marine with the flat top hair style. A single seat model with a wing span around 36 inches should be about right. Two...

1005-8

$2.88

Add:

1 3/4in X 2 1/2in Pilot P/N 1005-11

Depending on the paint applied this guy could pass for either a British or German pilot, a single seat model with a wing span around 24 inches should...

1005-11

$2.88

Add:

1 3/4in x 2 1/4in Pilot P/N 1005-10

This pilot has been very popular in WW1 biplane park flyers with a span of around 27 inches or WW2 fighters with a span of around 40 inches. Two half...

1005-10

$2.88

Add:

1 3/4in x 2in Jet Pilot P/N 1005-12

This pilot has been a best seller for us; used in the many pusher jet models with a span of 24 inches. Two half construction The...

1005-12

$2.88

Add:

1 3/4in x 2in Pilot P/N 1005-1

This navy pilot will fit most fighters with a wing span around 40 inches. Two half construction The assembly instructions are not...

1005-1

$2.88

Add:

1 3/4in x 2in Pilot P/N 1005-3

This civilian pilot will fit most single seat models with a wing span around 36 inches. Two half construction The assembly instructions...

1005-3

$2.88

Add:

1/4 Scale Corrugated panels

This material is formed with .020 plastic and can be bonded directly to your models control surface frame.The panels measure 10 1/2...

corrugated panels

$5.00

Add:

1/4 Scale Radial 7 cylinder

This model motor measures 11 1/2 inch in diameter and only weighs 15 ounces when completed. This will give your model a better useful load...

quarter radial 7 cyl

$17.90

Add:

1/4 Scale Radial 9 cylinder

This model motor measures 11 1/2 inch in diameter and only weighs 16 ounces when completed. This will give your model a better useful load...

quarter radial 9 cyl

$19.75

Add:

1/5 scale Dauntless Canopy set

This canopy set will allow yoiu to build your Dauntless with canopies that open. I if one blows off or gets dammaged replacement canopies are...

Dauntless canopy set

$48.00

Add:

1/5 scale Long EZ.

This canopy fits a 1/5 scale long EZ as well as the Cressline , St. Croix and the Fusco. The canopy is formed with .030 PETG plastic and measures 19...

C414

$10.00

Add: