Cowls

 

All cowls are listed by either the model they fit or by their dimensions. Radial cowls are listed by diameter X  length.
(image for) 1958 tripacer cowl
1958 tripacer cowl
This cowl fits the 1958 Tri Pacer designed by Bill Bradley featured in the July issue of Model Airplane News. Bill wanted you to have a cowl that is...

Bradly 1958 cowl (large)

$13.80
Add:
(image for) Dynam PBY Cowl
Dynam PBY Cowl
This cowl fits the Dynam PBY Catalina. The cowl is made with .040 plastic and measures 2 5/8" DIA. and is 2 inches long.

CW-30 PBY cowl

$2.30
Add:
(image for) Hobby King Pitts cowl
Hobby King Pitts cowl
~~This replacement cowl fits the Hobby King Pitts model 12 with the 1600mm wing span. Manufactured by Starmax. and banana hobbies   It is formed...

CW-100

$13.50
Add:
(image for) Hobby Kings Super Cub replacement cowl
Hobby Kings Super Cub replacement cowl
This cowl replaces the Hobby King Super Cub. This cowl is now made in two halves and requires assembly. The original single piece cowl and motor...

HK- super Cub cowl

$11.50
Add:
(image for) Multiplex Twin Star cowl
Multiplex Twin Star cowl
Before you click the buy now button read this!...

Twin Star Cowl

$2.30
Add:
(image for) Parkzone P-47 Replacement Cowl
Parkzone P-47 Replacement Cowl
This Replacement cowl fits Parkzone P-47. The cowl has closer to scale shaped cylinders molded into the inlet recess and the cowl flaps are opened a...

PZ- P-47 cowl

$8.05
Add:
(image for) Parkzone Wildcat cowl
Parkzone Wildcat cowl
This cowl fits the Parkzone HellCat and features a scale 7 cylinder radial rather than the flat stock motor. This scale...

PZ Wildcat replacement cowl

$5.75
Add:
(image for) Park Zone T-28 cowl upgrade
Park Zone T-28 cowl upgrade
This cowl comes not painted and has the improved scale radial motor formed into the cowl. Formed with .040 plastic it is a little tougher that the...

PZ T-28 cowl

$6.90
Add:
(image for) Constellation cowl
Constellation cowl
This replacement cowl fits the 69-inch span Constellation model offered on this site. It has a 3 ¼ inch diameter and a 2-inch hole opening in...

Constelation cowl

$6.90
Add:
(image for) Park Zone Corsair Replacement Cowl
Park Zone Corsair Replacement Cowl
This cowl fits the park Zone Corsair and the Great Planes combat Corsair.  It comes un-painted with some assembly and trimming required. The...

PZ cosair cowl

$8.05
Add:
(image for) E-flight P-47 cowl upgrade
E-flight P-47 cowl upgrade
This cowl comes not painted and has the improved scale radial motor formed into the cowl. Formed with .040 plastic it is a little tougher that the...

E flight P-47 cowl

$6.90
Add:
(image for) Ripmax spitfire cowl
Ripmax spitfire cowl
The rip max Spitfire cowl is .040 thick Vacformed high impact styrene. This is same material as the original but thicker. Due to the size of the cowl...

Ripmax spitfire cowl

$9.20
Add:
(image for) Radial cowl 3 inch diameter
Radial cowl 3 inch diameter
This cowl has a 9 cylinder motor molded into the part . it is formed with .030 plastic and measures 3 inch diameter, 2 inchs to the firewall and 1...

CW-18

$4.50
Add:
(image for) Radial cowl
Radial cowl
This cowl is formed with .030 plastic that is compatable with most paints. Super glue should be avoided for bonding because it causes cracks. Epoxy,...

CW-19

$4.50
Add:
(image for) radial cowl
radial cowl
this cowl is formed with .030 plastic and has a diameter of 2 7/8 inch. the depth os 2 inch from the front to the firewall.

CW-30

$4.50
Add:
(image for) Sky Baby cowl and tips
Sky Baby cowl and tips
This cowl and wing tips are sold as a set. The parts fit  the mansellet designm seen on RC groups.  The cowl is made with .040 thick...

Sky baby cowl set

$12.65
Add:
(image for) Radial cowl with scoops
Radial cowl with scoops
This cowl is ment to fit the older airliners ( DC-7) It is formed with .030 pastic and measures 2 1/4 Diameter at the firewall and is 3 1/2 inch...

CW-31

$4.50
Add:
(image for) Grumman Albatross cowl
Grumman Albatross cowl
This cowl fits the Grumman Albatross featured in the AMA Magazine and offered as a short kit on this website.  It measures 4 1/4 Dia and is 2...

CW-35

$6.90
Add:
(image for) Tomahawk cowl
Tomahawk cowl
This canopy fits Tom Mansell's Thomahawk model. It is formed with .040 white plastic .  The cowl Width at  the firewall  top...

CW-63

$5.75
Add:
(image for) Eflite Beechcraft Bonanza Cowl
Eflite Beechcraft Bonanza Cowl
This cowl fits the Eflite Beechcraft Bonanza Cowl P/N  (EFL2580) It is not a fiberglass cowl . it is formed with .040 PETG plastic. The same...

CW-64

$5.75
Add:
(image for) Cub Cowl
Cub Cowl
This cub cowl comes in two halves so assembly is required. Use plastic model cement not CA.   It is formed with .040 plastic to make it tough....

CW-65

$6.90
Add:
(image for) CW 5 1/2-A
CW 5 1/2-A
This cowl has a diameter of 5 1/2 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...

CW 5.5-A

$6.90
Add:
(image for) CW Base 5 1/2
CW Base 5 1/2
This cowl base fits the 5 1/2 inch cowl. This part will extend the length of your cowl by 1 3/4 inch  It is also used when cowl flaps are...

CW Base 5.5

$6.90
Add:
(image for) CW5.25-A
CW5.25-A
This cowl has a diameter of 5 1/4 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...

CW5.25-A

$6.90
Add:
(image for) CW Base 5.25
CW Base 5.25
This cowl base fits the 5 1/4 inch cowl. This part will extend the length of your cowl by 1 3/4 inch  It is also used when cowl flaps are...

CW Base 5.25

$6.90
Add:
(image for) CW 5-A
CW 5-A
This cowl has a diameter of 5 inchs and the length is 3  inches.  The length can be adjusted with the available cowl extension...

CW 5 -A

$6.90
Add:
(image for) CW Base 5
CW Base 5
This cowl base fits the 5 inch cowl. This part will extend the length of your cowl by 1 3/4 inch  It is also used when cowl flaps are...

CW Base 5

$6.90
Add:
(image for) CW 4.87-A
CW 4.87-A
This cowl has a diameter of 4 7/8 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...

CW 4.87-A

$6.33
Add:
(image for) CW Base 4.87
CW Base 4.87
This cowl base fits the 4 7/8 inch cowl. This part will extend the length of your cowl by 1 3/4 inch  It is also used when cowl flaps are...

CW Base 4.87

$6.33
Add:
(image for) CW 4.5-A
CW 4.5-A
This cowl has a diameter of 4 1/2 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension if...

CW 4.5-A

$6.33
Add:
Displaying 1 to 30 (of 64 Products)
Customer Service

Contact Park Flyer Plastics

  • +1(817)233-1215
  • North Richland Hills, TX 76180
  • Email Us

Hours: Monday-Friday 5-8 CST

Copyright © 2024 Park Flyer Plastics ~ Built by PRO-Webs.net