Dummy Engines

(image for) 4 cylinder opposed

4 cylinder opposed

So you need an engine for your 80 inch cub or a model with an exposed motor . This four cylinder opposed dummy motor might be what you are looking...

1029-7 4 cyl opposed

$14.90
Add:
(image for) 6 ½in long 4 ½in tall 6 Cylinder Cowled Engine P/N 10292-2

6 ½in long 4 ½in tall 6 Cylinder Cowled Engine P/N 10292-2

This cowled 6 Cylinder inline engine is used on our Macchi M-5 model and features a slot in the cowl to mount your electric motor and ESC. Perfect...

1029-2

$16.00
Add:
(image for) 5 ½in long 3in Tall 6 Cylinder Inline P/N 10292-1

5 ½in long 3in Tall 6 Cylinder Inline P/N 10292-1

This 6 Cylinder inline engine was used in Pat Tritles, Curtis pusher but would look good on other 6 Cylinder designs as well. It comes with the fuel...

1029-1

$13.50
Add:
(image for) Macchi small 4 1/4in X 3 1/8in P/N 10292-3

Macchi small 4 1/4in X 3 1/8in P/N 10292-3

This smaller Macchi motor is used on the Mike Midkiff designed free flight model. there is room inside for a small IPS motor and gearbox...

1029-3

$5.75
Add:
(image for) Inline 6 cylinder P/N 1029-4

Inline 6 cylinder P/N 1029-4

4 1/2 Inches long  1  3/8 inch tall and  3/4 inch  This engine detail set might be just what you need for your project. The set...

Haberstat. 1029-4

$4.50
Add:
(image for) Jenny motor V-8 P/N 10292-6

Jenny motor V-8 P/N 10292-6

  2 1/4 Inches long   3/4 inch tall and 1 inch wide ( measured at the cylinder head)  This engine detail set is used on...

Jenny 1029-6

$4.50
Add:
(image for) Jenny motor inline 4 cyl P/N 10292-5

Jenny motor inline 4 cyl P/N 10292-5

  3 Inches long 1 3/4 inch tall and 1 inch wide ( measured at the cylinder head)  This engine detail set is used on Pat...

Jenny 1029-5

$4.50
Add:
(image for) single cylinder

single cylinder

This cylinder comes with the valve cover and is used on the 4 cylinder opposed motor kit.  It has been made available for modelers that only...

single cylinder.

$1.70
Add:
Displaying 1 to 8 (of 8 Products)