The plans can be used to build either a Saber or MIG park flyer jet. The power for this model comes from a propeller mounted inside the fuselage to form an affordable and light weight alternative to electric ducted fans. The model uses a small 1800 to 2000 KV park flyer out runner motor and micro equipment. Three sheets of 3mm and 1/8 sheet of 6mm foam sheeting is needed to get started.
The plans are ink jet printed on bond paper and is color coded to help identify the patterns for either model. The plans come with minimum folds and rolled in a box with the plastic parts you choose.
NOTE: Since we have no idea which model or how many you want; the plastic parts are sold separately. This selection is for the plans only. If you order the plans only ( no plastic parts) they will be sent folded in an envelope.
Model Specs.
Wing Span...................27 inches
Weight ........................7.5 oz. ( no battery)
Length ........................24 inches
Wing area.....................168 sq. in
Motor…………………Out runner
KV……………………1800 to 2000
ESC..................………10 amp
Propeller………………9X7 three Blade modified
Battery…………………800 MAH three cell Lipo
