Cowls

 

All cowls are listed by either the model they fit or by their dimensions. Radial cowls are listed by diameter X  length.
1958 tripacer cowl

1958 tripacer cowl

This cowl fits the 1958 Tri Pacer designed by Bill Bradley featured in the July issue of Model Airplane News. Bill wanted you to have a cowl that is...
$12.00
Buy Now
3 3/4 inch B-17 cowl

3 3/4 inch B-17 cowl

This cowl fits the BILTZ RC Works B-17 currently sold thru Banana hobbies.The Cowl is formed with .040 plastic making it only .010 thinner than stock...
$4.00
Buy Now
Cub Cowl

Cub Cowl

This cub cowl comes in two halves so assembly is required. Use plastic model cement not CA.   It is formed with .040 plastic to make it tough....
$6.00
Buy Now
CW 3.5 -A

CW 3.5 -A

This cowl has a diameter of 3 1/2 inch and the length is 2 1/4 inch.  The length can be adjusted with the available cowl extension...
$5.00
Buy Now
CW 3.75-A

CW 3.75-A

This cowl has a diameter of 3 3/4 inch and the length is 2 1/2 inch.  The length can be adjusted with the available cowl extension...
$5.00
Buy Now
CW 5.5 - A

CW 5.5 - A

This cowl has a diameter of 5 1/2 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...
$6.00
Buy Now
CW 2.75-A

CW 2.75-A

This cowl has a diameter of 2 3/4 inch and the length is 1 3/4 inch.  The length can be adjusted with the available cowl extension...
$3.00
Buy Now
CW 23 PBM long

CW 23 PBM long

  Diameter 4 3/4"    length 4 1/2   " air inlet opening 3"   Suggested dummy motors part...
$10.00
Buy Now
CW 3-A

CW 3-A

This cowl has a diameter of 3 inchs and the length is 2 inches.  The length can be adjusted with the available cowl extension...
$4.00
Buy Now
CW 3.25 -A

CW 3.25 -A

This cowl has a diameter of 3 1/4 inch and the length is 2 1/8 inch.  The length can be adjusted with the available cowl extension...
$4.00
Buy Now
CW 3.87-A

CW 3.87-A

This cowl has a diameter of 3 7/8 inch and the length is 2 5/8 inch.  The length can be adjusted with the available cowl extension if...
$5.00
Buy Now
CW 4 -A

CW 4 -A

This cowl has a diameter of 4 inchs and the length is 2 3/4 inches.  The length can be adjusted with the available cowl extension if needed...
$5.50
Buy Now
CW 4.25-A

CW 4.25-A

This cowl has a diameter of 4 1/4 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension if...
$5.50
Buy Now
CW 4.37 -A

CW 4.37 -A

This cowl has a diameter of 4 3/8 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...
$5.50
Buy Now
CW 4.5-A

CW 4.5-A

This cowl has a diameter of 4 1/2 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension if...
$5.50
Buy Now
CW 4.87-A

CW 4.87-A

This cowl has a diameter of 4 7/8 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...
$5.50
Buy Now
CW 5-A

CW 5-A

This cowl has a diameter of 5 inchs and the length is 3  inches.  The length can be adjusted with the available cowl extension...
$6.00
Buy Now
CW Base 2.75

CW Base 2.75

This cowl base fits the 2 3/4 inch cowl. This part will extend the length of your cowl by 1 inch  It is also used when cowl flaps are...
$3.00
Buy Now
CW Base 3

CW Base 3

This cowl base fits the  3 inch cowl. This part will extend the length of your cowl by 1 1/8 inch  It is also used when cowl flaps are...
$4.00
Buy Now
CW Base 3.25

CW Base 3.25

This cowl base fits the 3 1/4 inch cowl. This part will extend the length of your cowl by 1 1/8 inch  It is also used when cowl flaps are...
$4.00
Buy Now
CW Base 3.5

CW Base 3.5

This cowl base fits the 3 1/2 inch cowl. This part will extend the length of your cowl by 11 1/4 inch  It is also used when cowl flaps are...
$5.00
Buy Now
CW Base 3.75

CW Base 3.75

This cowl base fits the 3 3/4 inch cowl. This part will extend the length of your cowl by 1 3/8 inch  It is also used when cowl flaps are...
$5.00
Buy Now
CW Base 3.87

CW Base 3.87

This cowl base fits the 3 7/8 inch cowl. This part will extend the length of your cowl by 1 3/8 inch  It is also used when cowl flaps are...
$5.00
Buy Now
CW Base 4

CW Base 4

This cowl base fits the 4 inch cowl. This part will extend the length of your cowl by 1 5/8 inch  It is also used when cowl flaps are...
$5.50
Buy Now
CW Base 4.25

CW Base 4.25

This cowl base fits the 4 1/4 inch cowl. This part will extend the length of your cowl by 1 3/4 inch  It is also used when cowl flaps are...
$5.50
Buy Now
CW Base 4.37

CW Base 4.37

This cowl base fits the 4 3/8 inch cowl. This part will extend the length of your cowl by 1 1/2 inch  It is also used when cowl flaps are...
$5.50
Buy Now
CW Base 4.5

CW Base 4.5

This cowl base fits the 4 1/2 inch cowl. This part will extend the length of your cowl by 1 1/2 inch  It is also used when cowl flaps are...
$5.50
Buy Now
CW Base 4.87

CW Base 4.87

This cowl base fits the 4 7/8 inch cowl. This part will extend the length of your cowl by 1 3/4 inch  It is also used when cowl flaps are...
$5.50
Buy Now
CW Base 5

CW Base 5

This cowl base fits the 5 inch cowl. This part will extend the length of your cowl by 1 3/4 inch  It is also used when cowl flaps are...
$6.00
Buy Now
CW Base 5.25

CW Base 5.25

This cowl base fits the 5 1/4 inch cowl. This part will extend the length of your cowl by 1 3/4 inch  It is also used when cowl flaps are...
$6.00
Buy Now
CW Base 5.5

CW Base 5.5

This cowl base fits the 5 1/2 inch cowl. This part will extend the length of your cowl by 1 3/4 inch  It is also used when cowl flaps are...
$6.00
Buy Now
CW-20 Pup cowl

CW-20 Pup cowl

Diameter 5 1/2 "    length  3 1/8 "   air inlet opening 3 3/4 " Suggested dummy motors...
$6.00
Buy Now
CW-21 GeeBee cowl

CW-21 GeeBee cowl

Diameter  5 "    length  3 " air inlet opening 2 5/8"     
$6.00
Buy Now
CW-22 PBM cowl

CW-22 PBM cowl

  Diameter  4 3/4 "    length  3 3/4 " air inlet opening 3"   Suggested dummy...
$6.00
Buy Now
CW-24

CW-24

  Diameter 5 7/8 "    length  2 1/2 " air inlet opening 4 3/8"   Suggested dummy motors part...
$7.00
Buy Now
CW-25 DR cowl

CW-25 DR cowl

  Diameter 6 "    length 2 3/4 " air inlet opening 1"   .  
$7.00
Buy Now
CW-27 Beech Cowl

CW-27 Beech Cowl

Diameter 4 1/16 inch   length  2 1/8"   air inlet opening 2 3/8 " This cowl fits the Beech 18...
$3.00
Buy Now
CW-28 Stinson CCowl

CW-28 Stinson CCowl

Diameter 5 1/8 "    length3 3/4" air inlet opening 3 1/4"     
$10.00
Buy Now
CW-60

CW-60

4" X 4" 3 1/4  long  and uses  a 3/4 inch spinner  
$3.00
Buy Now
CW-61 Extra cowl

CW-61 Extra cowl

This cowl  measures 3 14' X 3 3/4" and is 4 3/4 long.   It's formed with .030 plastic and bonds with a  male female fit....
$10.00
Buy Now
CW-62

CW-62

Thhis cowl measures 3 11/16" X 4 1/2" wide
$7.00
Buy Now
CW5.25-A

CW5.25-A

This cowl has a diameter of 5 1/4 inch and the length is 3  inches.  The length can be adjusted with the available cowl extension...
$6.00
Buy Now
DC-6 cowl

DC-6 cowl

This cowl fits the enlarged DC-6 as seen on RC groups from the original Pat Tritle design. The cowl is formed in two pieces to keep the plastic as...
$7.00
Buy Now
Dynam PBY Cowl

Dynam PBY Cowl

This cowl fits the Dynam PBY Catalina. The cowl is made with .040 plastic and measures 2 5/8" DIA. and is 2 inches long.
$2.00
Buy Now
E-flight P-47 cowl upgrade

E-flight P-47 cowl upgrade

This cowl comes not painted and has the improved scale radial motor formed into the cowl. Formed with .040 plastic it is a little tougher that the...
$6.00
Buy Now
Eflite Beechcraft Bonanza Cowl

Eflite Beechcraft Bonanza Cowl

This cowl fits the Eflite Beechcraft Bonanza Cowl P/N  (EFL2580) It is not a fiberglass cowl . it is formed with .040 PETG plastic. The same...
$5.00
Buy Now
Grumman Albatross cowl

Grumman Albatross cowl

This cowl fits the Grumman Albatross featured in the AMA Magazine and offered as a short kit on this website.  It measures 4 1/4 Dia and is 2...
$6.00
Buy Now
Hobby King Pitts cowl

Hobby King Pitts cowl

~~This replacement cowl fits the Hobby King Pitts model 12 with the 1600mm wing span. Manufactured by Starmax. and banana hobbies   It is formed...
$12.00
Buy Now
Hobby Kings Super Cub replacement cowl

Hobby Kings Super Cub replacement cowl

This cowl replaces the Hobby King Super Cub. This cowl is now made in two halves and requires assembly. The original single piece cowl and motor...
$10.00
Buy Now
Hobbyzone cub cowl fiberglass mold

Hobbyzone cub cowl fiberglass mold

This cowl mold will make a fiberglass cowl that will fit the Hobby zone Super cub. This Models cowl shape cannot be formed with thick...
$4.00
Buy Now

Shopping Cart  [more]

Your cart is empty.
Copyright © 2018 Park Flyer Plastics. | Powered by Zen Cart | Zen Cart Designer