This vintage canopy fits the old Baby Birdie, it is formed with .020 PETG clear plastic.
$2.30
Formed with .020 plastic
$1.75
Formed with .020 plastic
$2.60
Formed with .020 plastic
$2.00
7 x 1 1/4 x 1 3/8 made with .020 plastic
$2.00
made with .020 plastic
$3.00
Formed with .020 plastic
$1.75
made with .020 plastic
$1.75
Formed with .030 plastic
$5.75
Formed with .020 plastic
$2.60
~~This canopy fits the F4 Phantasm designed by Tony Eimen. It is formed with .020 PETG plastic. It measures 9 1/2 inch long 1 1/2 inch wide 1 5/8...
$2.60
This canopy fits the Goldberg Skylark 56. it is formed with .020 PETG plastic.
$2.88
This windshild fits the telmaster model and is made with .040 PETG plastic. the same material soda bottles are made with for toughness and...
$5.00
This windshild fits the great planes Taylorcraft model and is made with .030 PETG plastic. The same material soda bottles are made with for toughness...
$4.00
This windshild fits the goldburg anniversary Cub. and is made with .030 PETG plastic. The same material soda bottles are made with for toughness and...
$5.00
This windshield fits the Fly Zone De Havilland Beaver. It is formed with .030 PETG plastic and measures 4 inches top to bottom and 6 inches across....
$3.00
Formed with .030 plastic Measues 6" X 2 1/2" X 2"
$6.00
This canopy fits the Jonnie Casburn Lucky fly model It measures. 7 1/2 inch long, 3 5/8 wide and 4 inches high.
$4.00
This canopy fits the Great Planes Super Sportster Biplane. A great flying plane made in the 80's. Its made with .030 PETG plastic ; the same...
$5.00
This canopy fits the Multiplex twister , it replaces the stock foam canopy. It is made with .030 PETG plastic and is compatable with all paint...
$3.00
This canopy fits the Topflite Contender model , we are not sure of the version. It is made with .030 PETG plastic and is compatable with all paint...
$5.00
This canopy fits the Miss Darla model sent in by Scott Stanford. It is made with .030 PETG plastic and is compatable with all paint types. The...
$5.00
This canopy fits the chipmonk by Air Land Hobbies. It is made with .030 PETG plastic and is compatable with all paint types. The canopy...
$4.00
This canopy fits the house of balsa Beech Bonanza . It measures 16 1/2 inch long 3 inch wide at the front 2 1/2 inch tall from the base.
$9.20
this canopy fits the Ron Daniels design and is made with .030 PETG plastic
$4.60
This canopy is formed with .030 PETG plastic and comes with the cockpit incert. It measures 12 1/2 inch long, 2 1/4 inch wide , 2 inchg tall.
$5.75
This canopy is formed with .030 PETG plastic It measures: 10 1/2 inch long, 3 inch wide , 3 inch tall. This canopy...
$4.60
This canopy is formed with .030 PETG plastic It measures: 8 1/2 inch long, 3 1/2 inch wide , 2 3/4 inch tall.
$4.60
This vintage canopy fits the old Sweetater, it is formed with .030 PETG clear plastic.
$3.45
This canopy fits the Cuare 60 It is made with .030 PETG plastic and shipps clear. the canopy measures 8" long, 3 inch wide , 2 1/4...
$4.00
made with .030 PETG plastic measures 3" x 7" x 2"
$6.00
This canop[y fits the famous Sig Kouger. made with .30 PETG plastic.
$5.75
This vintage canopy fits the old Miss Norway, it is formed with .030 PETG clear plastic.
$2.30
Formed with .030 plastic
$6.00
made with .030 plastic
$5.75
made with .030 plastic
$3.45
This canopy fits the model designed by Dan Eaton. It measures 10 1/2" long 2 3/4" wide and is 2 1/4" tall. It is made with .030...
$3.45
Formed with .030 plastic
$5.75
Bridi Kaos 40 formed with .030 PETG plastic
$6.00
made with .030 plastic
$6.00
Formed with .030 plastic
$6.00
This vintage canopy fits the old Sterling Spitfire it is formed with .030 PETG clear plastic.
$4.60
made with .030 plastic
$5.75
Made with .030 PETG plastic measures 8 1/2" X 2 1/4" X 2 1/2"
$5.75
Formed with .040 plastic
$8.05
Made with .030 PETG plastic This canopy has been modified to give the builder more plastic below the window line for fitting. measures 8...
$5.75
This canopy fits the contender and is formed with .030 PETG plastic. it measures 12 inches long , 2 1/4 wide and 2 inches tall.
$5.75
These plastic parts fits Clanceys old Turbo Bee design. It includes the canopy and the inlet ring shown in the background. For your...
$12.65
This canopy fits the Duelist 40 The canopy is formed with .030 PETG plastic and measures 9 inches long 2 5/8 inch wide and 2...
$5.75
Vintage
