New Products

(image for) Hobby Kings Super Cub replacement cowl
Hobby Kings Super Cub replacement cowl
This cowl replaces the Hobby King Super Cub. This cowl is now made in two halves and requires assembly. The original single piece cowl and motor...

HK- super Cub cowl

$11.50
Add:
(image for) Cartoon Jet mig Parts
Cartoon Jet mig Parts
This plastic set fits the MIG version of the "Cartoon Jets" plans. The set contents are a light weight nose ring and pilot...

Cartoon Jet MIG. parts

$5.00
Add:
(image for) Cartoon Jet Saber parts
Cartoon Jet Saber parts
This plastic set fits the Saber version of the "Cartoon Jets" plans. The set contents are a light weight nose ring and pilot figure...

Cartoon Jet Saber parts

$5.00
Add:
(image for) Cartoon Jet plans only
Cartoon Jet plans only
The plans can be used to build either a Saber or MIG park flyer jet. The power for this model comes from a propeller mounted inside the fuselage to...

Cartoon jets plans

$15.00
Add:
(image for) 14in x 9/16in Aim-9 Missile
14in x 9/16in Aim-9 Missile
This kit can make either an AIM-9 sidewinder or AIM- 9J. The kits have parts that can make missiles of different types. Assigning a scale to the...

1038-4

$2.30
Add:
(image for) 12in x 1/2in Aim -9 Missle
12in x 1/2in Aim -9 Missle
This kit can make either an AIM-9 sidewinder or AIM- 9J. The kits have parts that can make missiles of different types. Assigning a scale to the...

1038-3

$4.00
Add:
(image for) Mustang Millennium
Mustang Millennium
This canopy fits Al Rabe's design, It measures 12" long 3 1/4" wide 3 1/2" tall. it is formed with .040 PETG plastic.

C133

$6.33
Add:
(image for) KCF-18
KCF-18
This canopy fits the model designed by Dan Eaton. It measures 10 1/2" long 2 3/4" wide and is 2 1/4"  tall. It is made with .030...

C119

$4.00
Add:
(image for) ME-109 13" x 5 1/2" x 3 1/4 "
ME-109 13" x 5 1/2" x 3 1/4 "
formed  with .030 PETG.

C414

$11.50
Add:
(image for) P-47 12 1/2" x 4 1/2" x 3"
P-47 12 1/2" x 4 1/2" x 3"
This canopy fits the World Models P-47 . It also fits Derek Micko's F8F Bearcat  published in Model Aviation April 2017.  It is formed...

C406

$11.50
Add:
(image for) Bonanza 13 1/2in x 3 1/2in x 3in
Bonanza 13 1/2in x 3 1/2in x 3in
This canopy fits a discontinued Bonanza kit from a few years ago. It is formed with .030  PETG.

C302

$5.75
Add:
(image for) Fomosa 8in x 2 1/4in x 2 1/2in
Fomosa 8in x 2 1/4in x 2 1/2in
This canopy fits the old Fomosa ARF fommie It came from our discontinued cockpit upgrade for the model. It is formed with .030  PETG.

C114

$3.45
Add:
(image for) JEMCO AT-6 12 1/2" X 3" x 3 3/4"
JEMCO AT-6 12 1/2" X 3" x 3 3/4"
This replacement  canopy fits the JEMCO AT-6 It is formed with .030  PETG.

C401

$6.00
Add:
(image for) P-40 ARF 11' x 8' x 5'
P-40 ARF 11' x 8' x 5'
This canopy fits an unidentified P-40 ARF but looks like a bearcat canopy to us It is formed with .040  PETG.

C506

$11.50
Add:
(image for) Mig 9in X 2 1/4in X 2 1/5in
Mig 9in X 2 1/4in X 2 1/5in
This canopy has a MIG shape but will work as a WW2 fighter canopy. Formed with .030 PETG.

C112

$4.00
Add:
(image for) Parkzone P-47 Replacement Cowl
Parkzone P-47 Replacement Cowl
This Replacement cowl fits Parkzone P-47. The cowl has closer to scale shaped cylinders molded into the inlet recess and the cowl flaps are opened a...

PZ- P-47 cowl

$8.05
Add:
(image for) 4.5 inch Dia 5 Cylinder Radial P/N 1028-19
4.5 inch Dia 5 Cylinder Radial P/N 1028-19
This  radial engine model kit basically comes in two halves and is used on models with an open cowl. It would also make a good static display or...

1028-19 5 cyl

$5.70
Add:
(image for) 7 Inch Chocks
7 Inch Chocks
This chock set fits wheels up to 7 inches with 1/8 inch free play to avoid putting dents in wheels made with foam rubber. Final trimming is...

Chock 1053-5

$11.50
Add:
(image for) 5 1/2 Inch Chocks
5 1/2 Inch Chocks
This chock set fits wheels up to 5 1/2 inches with 1/8 inch free play to avoid putting dents in wheels made with foam rubber. Final...

Chock 1053-4

$9.00
Add:
(image for) 4 3/4 inch Chocks
4 3/4 inch Chocks
This chock set fits wheels up to 4 3/4  inches with 1/8 inch free play to avoid putting dents in wheels made with foam rubber. Final...

Chock 1053-3

$5.75
Add:
(image for) 3 3/4 Inch Chocks
3 3/4 Inch Chocks
This chock set fits wheels up to 3 3/4 inches with 1/8 inch free play to avoid putting dents in wheels made with foam rubber. Final...

Chock 1053-2

$4.60
Add:
(image for) 3 Inch Chocks
3 Inch Chocks
This chock set fits wheels up to 3 inches with 1/8 inch free play to avoid putting dents in wheels made with foam rubber. Final trimming is...

chock 1053-1

$2.30
Add:
(image for) Inline 6 cylinder P/N 1029-4
Inline 6 cylinder P/N 1029-4
4 1/2 Inches long  1  3/8 inch tall and  3/4 inch  This engine detail set might be just what you need for your project. The set...

Haberstat. 1029-4

$4.50
Add:
(image for) Jenny motor V-8 P/N 10292-6
Jenny motor V-8 P/N 10292-6
  2 1/4 Inches long   3/4 inch tall and 1 inch wide ( measured at the cylinder head)  This engine detail set is used on...

Jenny 1029-6

$4.50
Add:
(image for) Jenny motor inline 4 cyl P/N 10292-5
Jenny motor inline 4 cyl P/N 10292-5
  3 Inches long 1 3/4 inch tall and 1 inch wide ( measured at the cylinder head)  This engine detail set is used on Pat...

Jenny 1029-5

$4.50
Add:
(image for) Fly Fly/Top Gun L-39 cockpit upgrade
Fly Fly/Top Gun L-39 cockpit upgrade
This cockpit upgrade fits the Top Gun L-39.  The kit uses none of the parts that came with your kit so you will still...

TG-L39 cockpit kit

$29.00
Add:
(image for) Parkzone Micro T-28 Cockpit Upgrade
Parkzone Micro T-28 Cockpit Upgrade
This cockpit upgrade fits the Parkzone T- 28 and comes with a canopy , cockpit tub, pilot figure , seat back and instrument panel....

PZ Micro T-28

$8.00
Add:
(image for) Cargo Extraction System
Cargo Extraction System
This is the cargo extraction system used on our C-130. its purpose is to push cargo out of cargo models in flight, it could be used on...

C.E.S.

$12.00
Add:
(image for) Skybaby cowl
Skybaby cowl
This cowl fits  the 1/4 scale skybaby designed by RCM plans #967, by Ken Willard. . The cowl is formed  with  .040 PETG and is ...

Skybaby clear cowl

$8.00
Add:
(image for) 5in x 6 1/2in Pilot P/N 1005-30
5in x 6 1/2in Pilot P/N 1005-30
This pilot is the lightest 1/4 scale pilot on the market with a completed weight of only one ounce. He is based on  a 5' 9"...

1005-30

$8.00
Add:
Displaying 301 to 330 (of 596 Products)
Customer Service

Contact Park Flyer Plastics

  • +1(817)233-1215
  • North Richland Hills, TX 76180
  • Email Us

Hours: Monday-Friday 5-8 CST

Copyright © 2024 Park Flyer Plastics ~ Built by PRO-Webs.net