All Products


5in X 5/16in ROCKET
This kit will make 8 Mark 5 rockets. Formed with .020 plastic and coomes in two halves.  The maximum length is listed but can be shortened to...

1036-3

$4.50Buy Now

5in x 6 1/2in Pilot P/N 1005-30
This pilot is the lightest 1/4 scale pilot on the market with a completed weight of only one ounce. He is based on  a 5' 9"...

1005-30

$8.00Buy Now

6 inch 9 Cylinder Radial Face P/N 1027-50
This engine face is formed with 030. white styrene. The plastic is compatible with about any type paint you wish to use, light coats are...

1027-50

$6.90Buy Now

6 inch Dia 5 Cylinder Radial P/N 1028-18
This model engine was designed to fit the Fleet biplane from Pat's custom models. It measures 3 inches from the center to the top of the cylinder...

1028-18

$8.25Buy Now

6 ½in long 4 ½in tall 6 Cylinder Cowled Engine P/N 10292-2
This cowled 6 Cylinder inline engine is used on our Macchi M-5 model and features a slot in the cowl to mount your electric motor and ESC. Perfect...

1029-2

$16.00Buy Now

6in X 2-1/8in Teardrop Tank
The 58 gallon teardrop shaped tanks are the easiest of our tanks to assemble and larger sizes will be available later as well as other shapes so...

1035-3

$2.50Buy Now

7 3/4in X 2 5/8in Teardrop Tank
The 58 gallon teardrop shaped tanks are the easiest of our tanks to assemble and larger sizes will be available later as well as other shapes so...

1035 - 5

$4.00Buy Now

7 Inch Chocks
This chock set fits wheels up to 7 inches with 1/8 inch free play to avoid putting dents in wheels made with foam rubber. Final trimming is...

Chock 1053-5

$11.50Buy Now

7-5/8in X 5/16in ROCKET
This kit will make 5 Mark 5 rockets. formed with .020 plastic and comes in two halves.  The maximum length is listed but can be shortened to fit...

1036-5

$5.75Buy Now

70 mm EDF nacelle
~~This is just the nacelle , you will have to provide the support structure for the fan and blast tube. The nose ring fits over the fan case and...

70mm EDF nacelle

$10.00Buy Now

757 W/O Plans
This 757 design was featured in the October 2007 issue of Flying Models Magazine. This model is a rather complex project due to the scale gear...

757-SK

$55.00Buy Now

757- WITH Plans
Wing Span 78 inches  Length 90 inches Flying weight 8.75 pounds.  Featured in Flying Models Magazine October 2007 This model...

757-PSK

$90.00Buy Now

7in X 2 1/2in Teardrop Tank
The 58 gallon teardrop shaped tanks are the easiest of our tanks to assemble and larger sizes will be available later as well as other shapes so...

1035 -4

$3.40Buy Now

8 3/4 inch 7 cylinder Radial Face P/N 1027-52
  This engine face is formed with  clear PETG plastic , the same material used to make soda bottles. However the plastic is thicker . ....

1027-52

$8.00Buy Now

8 1/2 inch 9 Cylinder Radial Face P/N 1027-54
  This engine face is formed with  clear PETG plastic , the same material used to make soda bottles. However the plastic is thicker . ....

1027-54

$8.00Buy Now

8 inch 9 Cylinder Radial Face P/N 1027-53
  This engine face is formed with  clear PETG plastic , the same material used to make soda bottles. However the plastic is thicker . ....

1027-53

$8.00Buy Now

8 inch 7 Cylinder Radial Face P/N 1027-51
This engine face is formed with  clear PETG plastic , the same material used to make soda bottles. However the plastic is thicker . ....

1027-51

$8.00Buy Now

8-1/2in x 7/16in Aim-9 Missile
This kit can make 2 missiles each of either an AIM-9 sidewinder, AIM- 9Jor Aim -9 GM This kit can make either an AIM-9 sidewinder or AIM- 9J. The...

1038-2

$4.50Buy Now

8-3/4in x 1-1/4in Missile
This kit will make one AGM- 62 Walleye missile.  The kit requires assembly and painting. Plastic model cement, acrylic or enamel paints are...

1038- 13

$4.50Buy Now

8in x 1in Missile
This kit will make one AGM-12 bull pup missile..   All the kits require assembly and painting. Plastic model cement, acrylic or enamel...

1038-11

$4.00Buy Now

8in x 3in Teardrop Tank
The 58 gallon teardrop shaped tanks are the easiest of our tanks to assemble and larger sizes will be available later as well as other shapes so...

1035 - 6

$4.50Buy Now

8in x 7/8in Makes 1 Torpedo P/N 1039-1
This is the only Torpedo we offer, more sizes will become available as demand dictates. We have provided the measurements of the completed kit so you...

1039-1

$1.70Buy Now

9 1/2in x 1 1/2in Wing Tank
This tank comes formed with .020 plastic an includes doublers to ease assembly.

1025-5

$3.50Buy Now

9 1/2in X 3 1/2in Teardrop Tank
The 58 gallon teardrop shaped tanks are the easiest of our tanks to assemble and larger sizes will be available later as well as other shapes so...

1035-7

$5.70Buy Now
Displaying 121 to 150 (of 594 Products)

Contact Park Flyer Plastics

  • +1(817)233-1215
  • North Richland Hills, TX 76180
  • Email Us

Hours: Monday-Friday 5-8 CST

Copyright © 2024 Park Flyer Plastics - Built by PRO-Webs.net