This cowl fits the Dynam PBY Catalina. The cowl is made with .040 plastic and measures 2 5/8" DIA. and is 2 inches long.
$2.30
Before you click the buy now button read this!...
$2.30
Diameter 4 1/16 inch length 2 1/8" air inlet opening 2 3/8 " This cowl fits the Beech 18...
$3.00
4" X 4" 3 1/4 long and uses a 3/4 inch spinner
$3.00
This cowl has a diameter of 2 3/4 inch and the length is 1 3/4 inch. The length can be adjusted with the available cowl extension...
$3.15
This cowl base fits the 2 3/4 inch cowl. This part will extend the length of your cowl by 1 inch It is also used when cowl flaps are...
$3.15
This cowl fits the BILTZ RC Works B-17 currently sold thru Banana hobbies.The Cowl is formed with .040 plastic making it only .010 thinner than stock...
$4.00
This cowl has a diameter of 3 inchs and the length is 2 inches. The length can be adjusted with the available cowl extension...
$4.30
This cowl has a diameter of 3 1/4 inch and the length is 2 1/8 inch. The length can be adjusted with the available cowl extension...
$4.30
This cowl base fits the 3 inch cowl. This part will extend the length of your cowl by 1 1/8 inch It is also used when cowl flaps are...
$4.30
This cowl base fits the 3 1/4 inch cowl. This part will extend the length of your cowl by 1 1/8 inch It is also used when cowl flaps are...
$4.30
This cowl is formed with .030 plastic that is compatable with most paints. Super glue should be avoided for bonding because it causes cracks. Epoxy,...
$4.50
this cowl is formed with .030 plastic and has a diameter of 2 7/8 inch. the depth os 2 inch from the front to the firewall.
$4.50
This cowl has a 9 cylinder motor molded into the part . it is formed with .030 plastic and measures 3 inch diameter, 2 inchs to the firewall and 1...
$4.50
This cowl is ment to fit the older airliners ( DC-7) It is formed with .030 pastic and measures 2 1/4 Diameter at the firewall and is 3 1/2 inch...
$4.50
This cowl has a diameter of 3 1/2 inch and the length is 2 1/4 inch. The length can be adjusted with the available cowl extension...
$5.75
This cowl has a diameter of 3 3/4 inch and the length is 2 1/2 inch. The length can be adjusted with the available cowl extension...
$5.75
This cowl has a diameter of 3 7/8 inch and the length is 2 5/8 inch. The length can be adjusted with the available cowl extension if...
$5.75
This cowl base fits the 3 1/2 inch cowl. This part will extend the length of your cowl by 11 1/4 inch It is also used when cowl flaps are...
$5.75
This cowl base fits the 3 3/4 inch cowl. This part will extend the length of your cowl by 1 3/8 inch It is also used when cowl flaps are...
$5.75
This cowl base fits the 3 7/8 inch cowl. This part will extend the length of your cowl by 1 3/8 inch It is also used when cowl flaps are...
$5.75
This cowl fits the Eflite Beechcraft Bonanza Cowl P/N (EFL2580) It is not a fiberglass cowl . it is formed with .040 PETG plastic. The same...
$5.75
This cowl fits the Parkzone HellCat and features a scale 7 cylinder radial rather than the flat stock motor. This scale...
$5.75
This canopy fits Tom Mansell's Thomahawk model. It is formed with .040 white plastic . The cowl Width at the firewall top...
$5.75
Diameter 5 1/2 " length 3 1/8 " air inlet opening 3 3/4 " Suggested dummy motors...
$6.00
Diameter 5 " length 3 " air inlet opening 2 5/8"
$6.00
Diameter 4 3/4 " length 3 3/4 " air inlet opening 3" Suggested dummy...
$6.00
This Cowl fits a Tom Martin's kit. All his cowls are listed by Tom's part numbers or the kit they apply to.
$6.00
This cowl has a diameter of 4 inchs and the length is 2 3/4 inches. The length can be adjusted with the available cowl extension if needed...
$6.33
This cowl has a diameter of 4 1/4 inch and the length is 3 inches. The length can be adjusted with the available cowl extension if...
$6.33
This cowl has a diameter of 4 3/8 inch and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.33
This cowl has a diameter of 4 1/2 inch and the length is 3 inches. The length can be adjusted with the available cowl extension if...
$6.33
This cowl has a diameter of 4 7/8 inch and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.33
This cowl base fits the 4 inch cowl. This part will extend the length of your cowl by 1 5/8 inch It is also used when cowl flaps are...
$6.33
This cowl base fits the 4 1/4 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.33
This cowl base fits the 4 3/8 inch cowl. This part will extend the length of your cowl by 1 1/2 inch It is also used when cowl flaps are...
$6.33
This cowl base fits the 4 1/2 inch cowl. This part will extend the length of your cowl by 1 1/2 inch It is also used when cowl flaps are...
$6.33
This cowl base fits the 4 7/8 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.33
This replacement cowl fits the 69-inch span Constellation model offered on this site. It has a 3 ¼ inch diameter and a 2-inch hole opening in...
$6.90
This cub cowl comes in two halves so assembly is required. Use plastic model cement not CA. It is formed with .040 plastic to make it tough....
$6.90
This cowl has a diameter of 5 1/2 inch and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.90
This cowl has a diameter of 5 inchs and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.90
This cowl base fits the 5 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.90
This cowl base fits the 5 1/2 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.90
This cowl base fits the 5 1/4 inch cowl. This part will extend the length of your cowl by 1 3/4 inch It is also used when cowl flaps are...
$6.90
This cowl has a diameter of 5 1/4 inch and the length is 3 inches. The length can be adjusted with the available cowl extension...
$6.90
This cowl comes not painted and has the improved scale radial motor formed into the cowl. Formed with .040 plastic it is a little tougher that the...
$6.90
This cowl fits the Grumman Albatross featured in the AMA Magazine and offered as a short kit on this website. It measures 4 1/4 Dia and is 2...
$6.90
This cowl comes not painted and has the improved scale radial motor formed into the cowl. Formed with .040 plastic it is a little tougher that the...
$6.90
Diameter 5 7/8 " length 2 1/2 " air inlet opening 4 3/8" Suggested dummy motors part...
$7.00