This is a redesigned version of the original Popfly kit sold years ago.
It has been updated and improved as a built up version of the same flying wing.
This kit can be assembled in the space of a desk top in just a few hours making it a good entry level subject for the first time foam builder.
Included in this kit is :
The laser cut foam parts. ( everything you would have to cut.)
3mm wing skins
Molded plastic parts: Equipment tub and cover, servo arm covers and molded clear leading edge for durability.
Laser cut control surface horns and a motor mount plate used for alternate motor installation methods.
The plans have step by step illustrations and printed instructions to complete the package.
This model has such a large flight envelope that the flight equipment is not included, I decided that choosing your own power system to suit your flying style would be best.
The power system listed on the plans will allow you to fly the model in a 7 MPH wind. Lighter / Less powered motors is suggested for indoor use or you can go the other direction if you feel the need for speed.
3 ft span , Foam sheet construction
7.6 oz. (weight without the battery)
designed to use:
IPS brushed motor, 10 amp ESC and a two cell lipo battery
He demonstrated the Popfly's flight envelope better than anything I could post on You tube.