Pilots

The pilots sizes are listed by their width then height, the largest 1/4 scale pilot first down to some fairly small figures. We are bound to have a pilot for your plane. Some figures have the option for you to position their heads and are displayed with the head turned. To find the proper pilot, measure your cockpit width and match the dimension to the pilot. The height can be adjusted by either trimming the figure or bonding scrap material under them. 
All figures require assembly and paint; instructions are found under the banner as well as a useful painting tutorial.
 
   
(image for) 1 3/4in x 2in Pilot P/N 1005-1
1 3/4in x 2in Pilot P/N 1005-1
This navy pilot will fit most fighters with a wing span around 40 inches. Two half construction     The assembly instructions are not...

1005-1

$2.88
Add:
(image for) 1 3/4in x 2 1/4in Pilot P/N 1005-10
1 3/4in x 2 1/4in Pilot P/N 1005-10
This pilot has been very popular in WW1 biplane park flyers with a span of around 27 inches or WW2 fighters with a span of around 40 inches. Two half...

1005-10

$2.88
Add:
(image for) 1 3/4in X 2 1/2in Pilot P/N 1005-11
1 3/4in X 2 1/2in Pilot P/N 1005-11
Depending on the paint applied this guy could pass for either a British or German pilot, a single seat model with a wing span around 24 inches should...

1005-11

$2.88
Add:
(image for) 1 3/4in x 2in Jet Pilot P/N 1005-12
1 3/4in x 2in Jet Pilot P/N 1005-12
This pilot has been a best seller for us; used in the many pusher jet models with a span of 24 inches. Two half construction     The...

1005-12

$2.88
Add:
(image for) 1 1/4in x 1 1/2in Pilot P/N 1005-13
1 1/4in x 1 1/2in Pilot P/N 1005-13
For smaller park jets (around 20 inch span) this guy has a head that can be turned for the photo pass. Three piece construction

1005-13

$2.00
Add:
(image for) 2 3/4in X 3in Pilot P/N 1005-14
2 3/4in X 3in Pilot P/N 1005-14
Dressed in a Vietnam flight suit this large pilot was designed to fit our OV-1 Mohawk and OV-1 bronco. Three piece construction   The assembly...

1005-14

$3.45
Add:
(image for) 1 1/4in X 2in Crew P/N 1005-15
1 1/4in X 2in Crew P/N 1005-15
This part number will get you an entire bomber crew, 6 figures in all. They were designed to fit a B-25 with a span of 52 inches but might look right...

1005-15 CREW

$7.80
Add:
(image for) 1in x 1 1/4in Pilot P/N 1005-16
1in x 1 1/4in Pilot P/N 1005-16
One of our smallest pilots designed to fit a park jet with a span of around16 inches. The head can be positioned on this little guy. Three piece...

1005-16

$2.30
Add:
(image for) 3in X 3in Pilot P/N 1005-17
3in X 3in Pilot P/N 1005-17
Designed to fit our Macchi M-5 this pilot could pass for a civilian or military pilot depending on the paint applied. Two half construction  ...

1005-17

$2.88
Add:
(image for) 2 1/2in X 3in Pilot P/N 1005-18
2 1/2in X 3in Pilot P/N 1005-18
With the rather bland detailing molded into this figure assembly is simplified. With a little imagination details would be easy to apply with paint....

1005-18

$2.88
Add:
(image for) 2 1/2in X 3in Pilot P/N 1005-19
2 1/2in X 3in Pilot P/N 1005-19
This figure is the same as the - 18 but a leather cap has been added to be used in open cockpits. Two half construction     The assembly...

1005-19

$2.88
Add:
(image for) 2in X 2 1/4in Pilot P/N 1005-2
2in X 2 1/4in Pilot P/N 1005-2
This Tuskegee Airman will fit most fighters with a wing span around 40 inches. Two half construction       The assembly instructions ...

1005-2

$2.88
Add:
(image for) 1 1/4in X 2in Pilot P/N 1005-20
1 1/4in X 2in Pilot P/N 1005-20
This guy went A.W.O.L. from the bomber crew to fly his own plane. He should fit well in models with a span of around 40 inches. Two half construction

1005-20

$2.30
Add:
(image for) 2 3/4in X 3 1/2in Pilot P/N 1005-21
2 3/4in X 3 1/2in Pilot P/N 1005-21
This stunt pilot was designed to fit the 3D hobbies Extra but should fit most stunt planes with a span of around 36 inches. Two half construction...

1005-21

$2.88
Add:
(image for) 2 1/2in X 2 1/2in Pilot P/N 1005-22
2 1/2in X 2 1/2in Pilot P/N 1005-22
This jet pilot was designed to fit the Multiplex Twister but has been applied to many models of equal size. Two half construction.     The...

1005-22

$2.88
Add:
(image for) 2 1/2in x 3 1/4in Pilot P/N 1005-23
2 1/2in x 3 1/4in Pilot P/N 1005-23
This private pilot is assembled in three pieces and is formed with .030 plastic to make the assembly of the head easier.With the head as a separate...

1005-23

$3.45
Add:
(image for) 2 3/4in X 3 3/4in Pilot P/N 1005-24
2 3/4in X 3 3/4in Pilot P/N 1005-24
This private pilot is assembled in three pieces and is formed with .030 plastic to make the assembly of the head easier.With the head as a separate...

1005-24

$3.45
Add:
(image for) 3in X 3 3/4in pilot P/N 1005-25
3in X 3 3/4in pilot P/N 1005-25
This WW1 pilot is assembled in three pieces and is formed with .030 plastic to make the assembly of the head easier.With the head as a separate...

1005-25

$3.45
Add:
(image for) 3 1/2in x 3 3/4in Pilot P/N 1005-26
3 1/2in x 3 3/4in Pilot P/N 1005-26
This Military pilot is assembled in three pieces and is formed with .030 plastic to make the assembly of the head easier.With the head as a separate...

1005-26

$3.45
Add:
(image for) 3in X 3 3/4in Pilot P/N 1005-27
3in X 3 3/4in Pilot P/N 1005-27
This Jet pilot is assembled in three pieces and is formed with .030 plastic to make the assembly of the head easier.With the head as a separate part,...

1005-27

$3.45
Add:
(image for) 3in X 3 3/4in Pilot P/N 1005-28
3in X 3 3/4in Pilot P/N 1005-28
This Jet pilot is assembled in three pieces and is formed with .030 plastic to make the assembly of the head easier. The shield id down for those...

1005-28

$3.45
Add:
(image for) 4 1/4in x 4 3/4in Pilot P/N 1005-29
4 1/4in x 4 3/4in Pilot P/N 1005-29
This pilot is the lightest 1/4 scale pilot on the market with a completed weight of only one half ounce. He is based on  a 5' 9"...

1005-29

$5.75
Add:
(image for) 1 3/4in x 2in Pilot P/N 1005-3
1 3/4in x 2in Pilot P/N 1005-3
This civilian pilot will fit most single seat models with a wing span around 36 inches. Two half construction     The assembly instructions...

1005-3

$2.88
Add:
(image for) 5in x 6 1/2in Pilot P/N 1005-30
5in x 6 1/2in Pilot P/N 1005-30
This pilot is the lightest 1/4 scale pilot on the market with a completed weight of only one ounce. He is based on  a 5' 9"...

1005-30

$8.00
Add:
(image for) 1 1/2in X 1 1/2in Pilot P/N 1005-4
1 1/2in X 1 1/2in Pilot P/N 1005-4
This civilian pilot will fit most single seat models with a wing span around 24 inches. Two half construction

1005-4

$2.30
Add:
(image for) 1 1/4in X 1 1/2in Pilot P/N 1005-5
1 1/4in X 1 1/2in Pilot P/N 1005-5
Here is a pilot you don t see every day, she would look good in an open cockpit. Two half construction

1005-5

$2.30
Add:
(image for) 1 1/2in X 1 1/2in Pilot P/N 1005-6
1 1/2in X 1 1/2in Pilot P/N 1005-6
Dressed for cold weather this civilian pilot will fit most single seat models with a wing span around 20 inches. Two half construction

1005-6

$2.30
Add:
(image for) 1 1/2in X 1 3/8in Pilot P/N 1005-7
1 1/2in X 1 3/8in Pilot P/N 1005-7
Here is a WW1 veteran depending on how you paint him. A single seat model with a wing span around 36 inches should be about right. Two half...

1005-7

$2.88
Add:
(image for) 1 3/4in X 1 1/2in Pilot P/N 1005-8
1 3/4in X 1 1/2in Pilot P/N 1005-8
This husky guy looks like a marine with the flat top hair style. A single seat model with a wing span around 36 inches should be about right. Two...

1005-8

$2.88
Add:
(image for) 1 1/4in X 1 1/4in Pilot P/N 1005-9
1 1/4in X 1 1/4in Pilot P/N 1005-9
This small pilot is has a unisex quality. (The long hair is simply paint) a single seat model with a wing span around 20 inches should be about...

1005-9

$2.30
Add:
Displaying 1 to 30 (of 30 Products)
Customer Service

Contact Park Flyer Plastics

  • +1(817)233-1215
  • North Richland Hills, TX 76180
  • Email Us

Hours: Monday-Friday 5-8 CST

Copyright © 2024 Park Flyer Plastics ~ Built by PRO-Webs.net